by Shannon
I have a very large framed mirror and I would like to hang it up.
+4
There is no wiring on the back to hang it, or brackets. What’s the best thing to put on the back of this so I can hang it without breaking the mirror. (ie. If I drilled holes or screw into it, I might crack the mirror.) Thank you.
6 answers
-
![Jacx]()
Jacx
on Jan 14, 2018
Is it wood? If it weighs over 30 pounds i don't advise a wire. Screw hangers, rated for this to each side. Make sure not to use screws too long! Then hang up each side onto screws into a stud or hollow wall anchor. Try for at least one stud. Measure from the ceiling, sometimes they are crooked. If lath and plaster, talk to someone familiar with this. It's done from the ceiling rail. -
![Nancy Turner]()
Nancy Turner
on Jan 15, 2018
If the frame is wood you should be able to put brackets on the frame. -
![Msd25590690]()
Msd25590690
on Jan 15, 2018
Take it to a frame shop and have them do it -
![Shoshana]()
Shoshana
on Jan 15, 2018
You got this! https://www.youtube.com/watch?v=V9kbo_MirvU![]()
-
![Inetia]()
Inetia
on Jan 15, 2018
https://www.google.com/search?q=heavy+mirror+hanging+kit&ie=utf-8&oe=utf-8&client=firefox-b-1-ab -
![Shannon]()
Shannon
on Jan 15, 2018
Thank you very much Inetia.
Jacx
on Jan 14, 2018
Nancy Turner
on Jan 15, 2018
Msd25590690
on Jan 15, 2018
Sign Up to Answer
Suggested Project Book
