How do you reattach the post from a broken silver pierced earring?
by Jp823062576
+9
8 answers
-
![Naomie Moore aka baileyanddaisey, Castaic CA]()
Naomie Moore aka baileyanddaisey, Castaic CA
on Jul 14, 2017
It needs to be soldered back on, you will need to take to a proper jewelry repair to have fixed for you. Not expensive.- See 1 previous
-
![Sunny C]()
Sunny C
on Jul 14, 2017
Hello Jp; You can try using Gorilla glue, or Superglue. I have just used a bot of Super glue on a bolo tie for a friend. So far, it has worked out great!I hope that this helps you!! Take Care!
-
![Elizabeth Michels Pinizzotto]()
Elizabeth Michels Pinizzotto
on Jul 14, 2017
I had mine repaired at a jeweler and asked him to make it slightly heavier so I couldn't break it again. Worked out well and not expensive. -
![William]()
William
on Jul 14, 2017
Super glue or two part epoxy may work. But the best way is to have a jeweler do the repair. More permanent. -
![Rosalie Rogers]()
Rosalie Rogers
on Jul 14, 2017
A jeweler will probably solder it back together instead of using glue. Any kind glue will be risky and temporary at best. -
![Sunny C]()
Sunny C
on Jul 14, 2017
Jp; You are Welcome!! Take Care! -
![Brenda]()
Brenda
on Jul 14, 2017
Gorilla glue is my favorite. -
![Christa wagner@gmail.com6127]()
Christa wagner@gmail.com6127
on Jul 14, 2017
super glue might work...otherwise a jeweler can solder it on for you
Naomie Moore aka baileyanddaisey, Castaic CA
on Jul 14, 2017
Elizabeth Michels Pinizzotto
on Jul 14, 2017
William
on Jul 14, 2017
Rosalie Rogers
on Jul 14, 2017
Sign Up to Answer
Suggested Project Book
