How can i repair wooden table leg when screws can't be used anymore.

  4 answers
  • Dfm Dfm on Dec 29, 2017
    you can try tooth picks in the screw holes...they fill up the hole, and make the screws grab.

  • Joy30150932 Joy30150932 on Dec 29, 2017
    If you insert wooden toothpicks into the hole to fill up some of the space you should be able to use the screws again.

  • Rose/Miros Rose/Miros on Dec 29, 2017
    If the screw holes go all the way through or can be made to do so not obviosly, use a bolt and nut with a big washer on both sides to protect the holes from further damage

  • Lamar Havard Lamar Havard on Dec 29, 2017
    You can get a 1/4" wood dowel and a drill bit the same size, drill out the screw holes, glue pieces of the dowel and drive them into the holes with a hammer. Let them dry and attach the leg with new screws.