How to construct a septic system?

+3
Answered
  5 answers
  • 27524803 27524803 on Dec 12, 2017
    Contact your local County government and get the building codes required for putting in a septic system... Once you have the requirements.. you can proceed from there

  • William William on Dec 12, 2017
    You need a professional. You are dealing with engineering, plumbing, environmental standards, ground perk tests. Codes are more critical.

  • Cindy Hagemann Cindy Hagemann on Dec 12, 2017
    Don't do this on your own, contact a licensed plumbing who can give you and estimate along with apply for all of the required permits.

  • SandyG SandyG on Dec 12, 2017
    First, check your local codes and then after getting info, make sure it is something you are licensed to do yourself. If not, contact a professional.

  • Pau5674629 Pau5674629 on Dec 13, 2017
    First you need a six feet hole then place tank in hole then extend the outlet pipe to a proper drainage or hole secondly if you do not have a tank seperate the hole in half with your outlet seal the top leave a lid opening for the cleaners