Can you put a window air condition with heat in a metal shed?
Geew on Apr 06, 2018Yes, but with no insulation, you are probably going to heat the outside in the winter and cool the outside in the summer.Courtesy of : http://kellerclinicsd.com/2015/04/20/options-for-adding-air-conditioning-to-your-backyard-shed/Window UnitsIf you have a window in your shed, you can install a window unit to cool a small space. You can use an air conditioning size calculator to determine the AC capacity of your shed so you can pick an appropriate unit.Depending on the type of window you have, you may have to remove it and replace it with a frame and panel that is more suitable for an AC wall unit. Alternatively, you can hire a contractor to cut a hole below the window for the AC so you can continue to enjoy the view to the outside after the unit is installed.If you install the window AC yourself, the unit should come with mounting brackets that you can secure with wood screws. Make sure to seal the edges around the brackets with caulk to prevent water seepage and air leaks.Helpful Reply
Suellen Hintz on Apr 06, 2018Yes.Helpful Reply
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to remove popcorn ceiling with vacuum?
Is there a way to use a vacuum to remove a popcorn ceiling?
How to fix a crack in a door frame?
How to fix a door frame with a split in it?
How to fix squeaky floors under tile?
How to fix squeaky floors under tiles. Don't wish to remove the tile floor first.
Tips for updating or repairing Pella between the glass blinds?
Our 14 year old cord controlled blinds are all giving us trouble with raising and lowering and tilting. Many of the top mechanisms are coming unglued from the top. I ... See more
Brr! Drafty windows- how to cut the draft?
I have 3 sets of windows configured like this...very drafty, How to you winterize them? There is nothing in the corner to stick tape to. Thank you
How do I extend this door?
I have these wonderful old doors, they are the right width, too short. How do I make them work?