How can build a rabbit ramp-like thing ??
Vanessa Simmons on Apr 23, 2017Hope you can read this. I'm sure you have a neighbor or coworker you could borrow a jigsaw from for the holes. If you have your measurements before you go to the lumber store they might cut the molding for you. You might need straight "tin snips" to cut the wire or a good pair of wire cutters.Helpful Reply
YetisMom on Apr 24, 2017If the cabinet is a 3-piece detachable one, you may want to try to lay it on its side and take the doors and drawers off. That way, you can make a longer ramp that's easier for him/her to climb. Remember to put little rungs on the ramp that act as little steps. You can use the space of the cabinet and drawers as a litter box area or a bed area with blankets for the bun. If your bunny is anything like mine, blankets are fun for making holes in! Haha!Helpful Reply
Suggested Project Book
What to do with our livingroom ceiling?
We took the old popcorn ceiling off in our livingroom and thought we could just paint it. We fixed some hairline cracks where the joint in the sheetrock are, primed a... See more
How would I be put on these wheels ?
I am planning on doing a mobile wood bench using 2x4. I have these wheels but have no clue to put them on
What type of hinges are used on the top of this folding table?
Does anyone know what type of hinges are attached to the top of this folding table? The legs fold in toward the back then the top folds down flat against the legs.
Sealing/smoothing crate wood
I am turning the sides of an old wooden crate into a coffee table top. The wood is similar to pallet wood: unfinished and prone to giving splinters. How might I go ab... See more
Ideas for reworking our full size headboard to our new king size bed??
We have a head and foot board from a full size bed. We want to somehow put the two pieces together to make a King size headboard. We don't need a foot board any more.... See more
How can I raise the height of this vanity?
I bought this lovely antique piece, but it's too short for an average adult. Can I safely add castors to the bottom of the feet or might they split? Any other ideas t... See more
Looking for rings around 27 inches in diameter that can hold weight...
The rings will be sat on so preferably I'd like them to be able to hold around 200 lbs. I could possibly settle for around 150 lbs. I have looked at Home Depot, Hobb... See more