taking out wood stove
-
KMS Woodworks on Feb 24, 2013Is this a wall penetration or through the roof? Walls are pretty easy, you remove the "thimble" of flange assembly and then can insulate and repair or replace the wall covering. In roof situations most folks will leave the chimney flashing in place until the next "roofing" job is required. Unless you have a current leak and are looking for a smooth roof line then the repair will require some blocking, sheathing, underlayment shingles etc.Helpful Reply
-
-
Terry S on Feb 24, 2013both, through the wall and up the chimneyHelpful Reply
-
-
Terry S on Feb 24, 2013kevin it is through the wall and up the chimney?do we just fill hole with insulation or cap somehow before we drywall?Helpful Reply
-
-
Woodbridge Environmental Tiptophouse.com on Feb 24, 2013Cap the top. and seal the bottom. Use a large square stone on the top with a sheet of asphalt paper under to prevent any seepage from the stone getting down the abandoned flue pipe. Ideally you should use a foam board at the top and bottom to insulate and to stop any air traveling. Then simply cover over with drywall. I would put some photos of the fire place wood stove inside the wall as someday in 50 years or so someone may open the wall and find this gem and wonder what it looked like before someone covered it over.Helpful Reply
-
-
KMS Woodworks on Feb 25, 2013I like Bobs Time capsule idea...one thing that may also come in handy is some spray foam. I have used it to fill some gaps and opening in some repairs before the drywall and mud job.Helpful Reply
-
Related Discussions
How do I get the black marks off my composite deck?
As we all know New England is getting hammered with snow this year! And I had so much snow on the deck that I had to use the snowblower to get it off. I'm anticipatin... See more
How do I remove a rust stain from a wooden deck?
How do I remove a large, deep rust stain from a metal pan off my stained wooden deck?
How do I get grease stains off of composite decking material?
I have a bbq rug under the grill but I ended up getting some grease on the material anyway. Any idea?
How to remove Behr Deckover?
We used Bher Deck over about 5 years ago. It is peeling and fading in places. We have tried to remove it. It is almost impossible. HELP!
How do you remove an oil stain from composite decking?
I moved a snow blower to my composite porch for the up coming winter. After it was moved I noticed it had dripped engine oil on the deck and it soaked into the compos... See more
How can i keep neighbors small children from climbing my fence?
I have a 20 year old chain link fence set back on my property by almost a foot. The neighbors small children keep climbing it. I have talked to the dad and he doesn't... See more