We just had sidewalks poured a week ago.
-
Bob and RodMan S on Dec 07, 2011Give your contractor a chance to evaluate and take care of the problem. Concrete goes through a "chemical" process as it hardens and cures - it does not "dry" as we think of paint drying. Typically the freshly poured concrete is kept wet or damp as it hardens since the water is actually incorperated into the material as it hardens. If your sidewalk was covered unevenly with damp blankets the surface could reflect the differences in hydration in the blotched pattern illustrated. An on site review by your contractor or another concrete professional should determine if a surface cleaning with one of the standard concrete cleaners will take care of the problem without other damageHelpful Reply
-
-
Harold M on Dec 07, 2011If it was freezing when he poured it, did they add calcium? Thats an old trick we used to use in upstate New York to keep it from freezing during curing. Of course we were pouring footers not sidewalks. I'd probably wait and see if it comes off after curingHelpful Reply
-
-
Stephanie B on Dec 07, 2011I did call the contractor...he said he did add calcium. It was not freezing when he poured...maybe 45-50 degrees, of course cooler at night. He said the white marks happened because of the blankets he had to cover the concrete with? He wasn't willing to come and look or do anything about it...so not really helpful in making me feel better. I am hoping it goes away like he seems to think...it really looks worse then this pic even shows.Helpful Reply
-
-
Frye finish carpentry & handyman services on Dec 07, 2011You should be fine that will wear off ,That's just the lime in the concrete,and an imprint of the blankets,Nothing to worry about,they look nice.Helpful Reply
-
-
Paul M on Dec 07, 2011Over time the white marks will diminish or even go away completely. However you can speed up the process by cleaning with muriatic acid. Considering your temperature there and the fact that the concrete is new I would wait until spring to do it so you can let it weather a bit and cure some more as well. It takes several years for concrete to reach its full cure strength and when it is cold it takes even longer because the chemical reaction is slowed. When you weather begins to warm use some diluted acid and a stiff brush on a pole, douse it good and scrub a bit, then rinse thoroughly. It may take a few shots but it should come clean. If it doesn't you may want to consider using a concrete stain. Good luck!!!Helpful Reply
-
-
Amazing Improvements and Garages on Dec 10, 2011Vinegar. Instead of muriatic acids. They are less aggressive and will allow the moisture to "vent" as it dries. There was another thread earlier this year and it came down to vinegar. Dampen the surface with water, apply the vinegar and allow to sit in the sun..... it will clear up. Good Luck!Helpful Reply
-
-
Paul M on Dec 10, 2011Well that would probably work too. I have never tried it but vinegar is an acid as well although much milder. Most commercial professionals use muriatic acid but then again they are in a big hurry to get off the job too.Helpful Reply
-
Related Discussions
Stray Cats Overtaking My Yard, Garden and Areas Around My House.
My neighbor has a million cats. This draws other cats to the area. My yard is full of cat poop, my gardens and plants are disgusting with the cat spray. What can I do... See more
How to paint grout?
How do I paint grout to change the color? The grout is in great shape, but the color - meh.
How can I paint an indoor futon to be suitable for outdoor use?
need to know step by step
How to whitewash a brick fireplace?
What is the best method to whitewash bricks surrounding a fireplace?
How can I darken the color of painted furniture using varnish?
Hi, I just paint my outdoor dining set, but the color is a little lighter than what I want. I am planning to apply varnish on them and I was thinking to take advantag... See more
How to paint a metal front door?
How do I paint my front door? It's metal.