Prefab handscraped hardwood floors vs. actual handscraped hardwoof floors -
-
Woodbridge Environmental Tiptophouse.com on Mar 23, 2013The quality of the higher end pre scraped planks are much better then anything you can get if you finish them yourself. However a good quality oil stain on a DIY hand scraped floor works really well also. My personal selection would be to purchase a high end pre scraped and finished floor.Helpful Reply
-
-
KMS Woodworks on Mar 23, 2013Actually the process is not the same. Flooring that is purchased as "pre scraped" typically has a better more consistent finish. In most cased this is a ceramic oxide type finish, which is a bit more durable than the basic finish applied "in house". You will also have the "look" being different. Planks that are scraped in the factory are scrapped as individual planks, then finished. When these are installed the edges and ends will have a more random pattern. Flooring that is installed THEN scrpped will have the scrap pattern cross one or more board joints. Clearly showing it was scrapped "inhouse". Factory "hand scraped" is often "machine" scraped as this is in a production factrory environment. The "hand" scraping in house generally is actual hand work...so there is an added cost for labor. The look of hand scrapped is a "fashion" tend and may or may not be in style over the life of the floor. This process is also something that reduces the over all life of the floor. The scrapping process removes relatively large bits of wood. And in the future if the homeowner wants a smooth floor, then level of sanding is much greater to make it all smooth. This removes more wood than a basic sanding. The durability of a floor varies by the wood itself and the finish that is applied. Check out this article I wrote on floor finishes. http://www.networx.com/article/exotic-wood-floor-finishes-you-havent-s and a blog post I did on bamboo and wood durability http://kmswoodworks.wordpress.com/2010/04/18/the-great-green-washing-of-bamboo-flooring/ My hands down favorite is a good dense wood like Jatoba finished with a penetrating oil finish. This is what I used in my master suite. As seen in this pic http://www.flickr.com/photos/kmswoodworks/4497266296/in/set-72157623787645678Helpful Reply
-
-
Marie Sanderson on Mar 25, 2013Thank you for your replies. Very helpful information.Helpful Reply
-
Related Discussions
How to kill artichoke weed?
How do you kill an artichoke weed? It's a green pointed leaf and has a white root with runners. When my grand daughter was young, she thought they were worms and du... See more
Are gray walls here to stay or are they on their way out?
Hey everyone,Gray wall color has long been a favorite choice due to its versatility, modern appeal, and ability to complement a wide range of design styles.But the qu... See more
Can I put laminate flooring over tile that has rather large grout line
house was built in 2006 all rooms have large square tile floors all the same dull color large indented grout lines can I have new floors without taking up all... See more
What can I use to glue the pennies to the top of the wood table?
I seen this piece at a garage sale this fall and thought it was a fun idea for a table top on a random little table I have. Besides asking what to use to glue the pe... See more
How do I prevent my dogs bed from sliding in her kennel?
When my dog moves around her bed moves with, thus creating a loud dog nail against plastic noise