Prefab handscraped hardwood floors vs. actual handscraped hardwoof floors -
-
Woodbridge Environmental Tiptophouse.com on Mar 23, 2013The quality of the higher end pre scraped planks are much better then anything you can get if you finish them yourself. However a good quality oil stain on a DIY hand scraped floor works really well also. My personal selection would be to purchase a high end pre scraped and finished floor.Helpful Reply
-
-
KMS Woodworks on Mar 23, 2013Actually the process is not the same. Flooring that is purchased as "pre scraped" typically has a better more consistent finish. In most cased this is a ceramic oxide type finish, which is a bit more durable than the basic finish applied "in house". You will also have the "look" being different. Planks that are scraped in the factory are scrapped as individual planks, then finished. When these are installed the edges and ends will have a more random pattern. Flooring that is installed THEN scrpped will have the scrap pattern cross one or more board joints. Clearly showing it was scrapped "inhouse". Factory "hand scraped" is often "machine" scraped as this is in a production factrory environment. The "hand" scraping in house generally is actual hand work...so there is an added cost for labor. The look of hand scrapped is a "fashion" tend and may or may not be in style over the life of the floor. This process is also something that reduces the over all life of the floor. The scrapping process removes relatively large bits of wood. And in the future if the homeowner wants a smooth floor, then level of sanding is much greater to make it all smooth. This removes more wood than a basic sanding. The durability of a floor varies by the wood itself and the finish that is applied. Check out this article I wrote on floor finishes. http://www.networx.com/article/exotic-wood-floor-finishes-you-havent-s and a blog post I did on bamboo and wood durability http://kmswoodworks.wordpress.com/2010/04/18/the-great-green-washing-of-bamboo-flooring/ My hands down favorite is a good dense wood like Jatoba finished with a penetrating oil finish. This is what I used in my master suite. As seen in this pic http://www.flickr.com/photos/kmswoodworks/4497266296/in/set-72157623787645678Helpful Reply
-
-
Marie Sanderson on Mar 25, 2013Thank you for your replies. Very helpful information.Helpful Reply
-
Related Discussions
Best way to make your driveway look like stone with paint?
Several years ago there was a DIY video on how to do this but can't fine it.
Are gray walls here to stay or are they on their way out?
Hey everyone,Gray wall color has long been a favorite choice due to its versatility, modern appeal, and ability to complement a wide range of design styles.But the qu... See more
Which mattress firmness do you prefer: soft or hard?
Finding the perfect mattress can be a game-changer for your sleep quality and overall health.So, we're curious: When it comes to mattress firmness, what’s your pref... See more
Toilet: Rumbling / Vibrating Noise when FILLING up (SMOOTH when flush)
When flushing the toilet, no problem, smooth flush like all others, no issues. (My 1st inclination of the noise when filling up was a clogged toilet, but it flushes q... See more
Clean grout hard (iron) water stains?
We have a shower that has laminate side and flooring. The areas were grout is has turned orange/Black. I have used vinegar applied with toothbrush, Granite Gold grout... See more
How do I remove super glue from a rubber floor mat?
I spilled glue on my rubber floor mat and have tried alcohol, soap, goop and some other things, but nothing took it all away.
How to remove cigarette smoke smell from my sewing machine?
I just bought a used sewing machine. Brought it home and wiped it down with Clorox wipes and they were dirty. Now the machine reaks of cigarette smoke. I tried vinega... See more