Prefab handscraped hardwood floors vs. actual handscraped hardwoof floors -
-
Woodbridge Environmental Tiptophouse.com on Mar 23, 2013The quality of the higher end pre scraped planks are much better then anything you can get if you finish them yourself. However a good quality oil stain on a DIY hand scraped floor works really well also. My personal selection would be to purchase a high end pre scraped and finished floor.Helpful Reply
-
-
KMS Woodworks on Mar 23, 2013Actually the process is not the same. Flooring that is purchased as "pre scraped" typically has a better more consistent finish. In most cased this is a ceramic oxide type finish, which is a bit more durable than the basic finish applied "in house". You will also have the "look" being different. Planks that are scraped in the factory are scrapped as individual planks, then finished. When these are installed the edges and ends will have a more random pattern. Flooring that is installed THEN scrpped will have the scrap pattern cross one or more board joints. Clearly showing it was scrapped "inhouse". Factory "hand scraped" is often "machine" scraped as this is in a production factrory environment. The "hand" scraping in house generally is actual hand work...so there is an added cost for labor. The look of hand scrapped is a "fashion" tend and may or may not be in style over the life of the floor. This process is also something that reduces the over all life of the floor. The scrapping process removes relatively large bits of wood. And in the future if the homeowner wants a smooth floor, then level of sanding is much greater to make it all smooth. This removes more wood than a basic sanding. The durability of a floor varies by the wood itself and the finish that is applied. Check out this article I wrote on floor finishes. http://www.networx.com/article/exotic-wood-floor-finishes-you-havent-s and a blog post I did on bamboo and wood durability http://kmswoodworks.wordpress.com/2010/04/18/the-great-green-washing-of-bamboo-flooring/ My hands down favorite is a good dense wood like Jatoba finished with a penetrating oil finish. This is what I used in my master suite. As seen in this pic http://www.flickr.com/photos/kmswoodworks/4497266296/in/set-72157623787645678Helpful Reply
-
-
Marie Sanderson on Mar 25, 2013Thank you for your replies. Very helpful information.Helpful Reply
-
Related Discussions
What can I use to stop flies from collecting on my new deck?
My deck is new , I was told flies are attracted to the sap of the wood,.
How do I remove paint from painted tile and tub?
How should I remove paint from a tile floor and a bathtub?
How do I take off hard water from my tub?
Here’s my issue I have been living in the same apartment building for 18 years and I have a tub that deals with hard water on a daily basis. What is the best way fo... See more
How do I keep my shower curtain from getting red water stains?
How can I turn this old doll house into a book shelf?
What front door paint color would you avoid?
Let's have a little fun with front door colors! We all have our preferences when it comes to home decor, and that includes the color of our front door.But today, I wa... See more
How do I stop cars from making u-turns in my driveway?
When traffic backs up on our street,people use our driveway to make u-turns. It makes me crazy, especially when the kids are out there.