Best way to clean black mold inside base of shower, and re-caulk?
-
3po3 on Feb 07, 2012Dan's of Central Florida offers some great tips in response to a similar question from last year: http://www.hometalk.com/activity/26667 As far as re-caulking, there are some mold-resistant caulks on the market. Look for specialty tile suppliers in your area.Helpful Reply
-
-
Woodbridge Environmental Tiptophouse.com on Feb 07, 2012A good quality scrub brush with a bleach and water solution will do the trick. Do the entire shower/tub area. Then remove any older caulk by carefully scraping it away. Tile saws, sharp knife, scrapers etc. Then re-caulk using a good quality bathroom and kitchen caulk with Microban in it. This will help prevent new development of the mildew. Once that is all done and the caulk is dry, about one day. Then using a good quality sealer, reseal the grout and tile. The mold, mildew or what ever you want to call it is feeding on the soap, the dead skin cells and stuff we do not want to talk about that has become embedded into the surface or stuck to the surface of the tile has provided a food source for this to grow. By cleaning and sealing you will make it easier in the future to keep the shower base clean so there will be less gunk to support the growth you are seeing. It is not a pleasant job to do, but if done properly cleaning will become easier for a few more years.Helpful Reply
-
Related Discussions
Blackout curtains behind vertical blinds
I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba... See more
How do I stop the pitting on my stainless steel refrigerator?
I have a 7 month old Frigidaire brand stainless steel refrigerator and I noticed pitting and rust spots numbering somewhere around 30 or 40. Is there something I can... See more
How many solar panels do I need for 1600sq. ft home?
How do I make fall leaf luminaries?
I saw someone making gorgeous luminaries with fall leaves, and I want to give it a try. Do you have any ideas on how to make them?
Where can I find a plastic version of cinder blocks?
I want to decorate my roof garden with benches and shelves, but don't want to invest in the weight.