Is peeling paint on house due to poor paint job or too much rain/water?
-
Clay B on Apr 02, 2012Could be many factors. Too many layers of paint, gets heavy, and can peel and fall off. Sometimes the wood needs to be sanded so primer and paint can stick. If wood was wet or contained too much moisture before you painted, that can cause peeling. Is water getting behind the wood? What type if siding do you have, shingles, clabboards etc? Was was on the surface before you painted, old paint, if yes, was the old paint sticking and not peeling? If you put oil based over latex, that would be problem. Latex over oil based is ok. SInce it's only where your garden is, it's probably getting way too much direct water, and the water is getting behind the wood siding.Helpful Reply
-
-
Peace Painting Co., Inc. on Apr 02, 2012Could this be the afternoon sun side too? A picture would be nice.Helpful Reply
-
-
Ginny C on Apr 02, 2012It is the the afternoon sun side. It's wood siding, not sure about the kind of paint but I think it was water based. The wood is so wet where it's been peeling that I can actually press into it with my fingers. If I get it to try out would I be able to do an inexpensive repair on it? The rest of the house is ok so it must be the amount of water over the past couple years. I'd like to be able to hold off an expensive repair until I can decide whether to put some other type of siding on the house.Helpful Reply
-
-
Peace Painting Co., Inc. on Apr 02, 2012Minwax makes a wood repair kit which is like bondo. You can also first brush on their wood hardener which is a wood fortifier or solidifier that bonds loose wood fibers together. Start by digging out the soft parts when dry, brush in the wood hardener then use the wood repair kit paste. Then caulk up the wood joints. This will give you one or two years of a patch until you decide. Best, CharlesHelpful Reply
-
-
Ginny C on Apr 02, 2012Thanks for the answers, but I'm still hoping for more ideas.Helpful Reply
-
-
Peace Painting Co., Inc. on Apr 03, 2012Ginny, the other loose paint areas need to be scraped and sanded until only firm paint remains. After washing and thoroughly dried, use oil base primer on the bare areas. Then you are ready to brush/roll apply two coats of top-line finish paint for the best protection. CPHelpful Reply
-
-
Ginny C on Apr 03, 2012thanks allHelpful Reply
-
-
Clay B on Apr 03, 2012If you can press your finger into the wood, you need to replace the siding in that area. Better to replace the siding before it rots the plywood/structure underneath that.Helpful Reply
-
-
Pam on Apr 20, 2012Did your painter use oil or latex base paint?Helpful Reply
-
-
Clay B on Apr 23, 2012One more thought, once siding is fixed, think about watering with a soaker hose.Helpful Reply
-
Related Discussions
Best way to make your driveway look like stone with paint?
Several years ago there was a DIY video on how to do this but can't fine it.
Are gray walls here to stay or are they on their way out?
Hey everyone,Gray wall color has long been a favorite choice due to its versatility, modern appeal, and ability to complement a wide range of design styles.But the qu... See more
Which mattress firmness do you prefer: soft or hard?
Finding the perfect mattress can be a game-changer for your sleep quality and overall health.So, we're curious: When it comes to mattress firmness, what’s your pref... See more
Toilet: Rumbling / Vibrating Noise when FILLING up (SMOOTH when flush)
When flushing the toilet, no problem, smooth flush like all others, no issues. (My 1st inclination of the noise when filling up was a clogged toilet, but it flushes q... See more
Clean grout hard (iron) water stains?
We have a shower that has laminate side and flooring. The areas were grout is has turned orange/Black. I have used vinegar applied with toothbrush, Granite Gold grout... See more
How do I remove super glue from a rubber floor mat?
I spilled glue on my rubber floor mat and have tried alcohol, soap, goop and some other things, but nothing took it all away.
How to remove cigarette smoke smell from my sewing machine?
I just bought a used sewing machine. Brought it home and wiped it down with Clorox wipes and they were dirty. Now the machine reaks of cigarette smoke. I tried vinega... See more