We were told we need to have a licensed plumber pull a permit and do a Gas Line Pressure Test. What's involved in this t
-
Woodbridge Environmental Tiptophouse.com on May 05, 2012Unless something is different in GA then in most states a home owner can pull their own permits and do the work themselves. A pressure test is simply plugging the gas pipe at each end and putting about 15 lbs of air pressure in the line. An attached gauge is installed and the inspector comes out to read it once its set and under pressure and comes back next day and reads it again. No pressure drop, no issue. Also if the gas pipe is entirely exposed and is not being buried behind a wall, some inspectors will approve without pressure test. In any regards its simple. We use nitrogen when we test as it does not change pressure with air temps. Compressed air goes higher in pressure when it warms out.Helpful Reply
-
-
Kevin M. Veler, Law Office of on May 07, 2012IRC G2417 requires gas pressure test for inspection. I am sure our contractors can tell you what is required. I am assuming you are having work done on a new gas line or modifying an existing line. Generally YOU, the homeowner, does not want to pull the permit because that makes YOU responsible for code compliance. The contractor who is performing the work should pull the permit and obtain the inspection. Not sure which part of the city you are in but you can find out more about these inspections online. For example, http://www.alpharetta.ga.us/index.php?p=228 allows you to download the Residential Building Inspections Policies and Procedures from their website. If you have more questions about the inspection, call your local building inspector. I have found that most of them are very helpful and want you to understand that code compliance is for your safety.Helpful Reply
-
-
Rikki Burn on Nov 28, 2012The best thing to do is get a <a href="http://chapmanplumbingal.com">plumbing contractor</a> over to your house and get details, even calling to get details would be a good idea. At least you'd be speaking to an experienced professional. Good Luck!Helpful Reply
-
Related Discussions
Best way to make your driveway look like stone with paint?
Several years ago there was a DIY video on how to do this but can't fine it.
Are gray walls here to stay or are they on their way out?
Hey everyone,Gray wall color has long been a favorite choice due to its versatility, modern appeal, and ability to complement a wide range of design styles.But the qu... See more
Which mattress firmness do you prefer: soft or hard?
Finding the perfect mattress can be a game-changer for your sleep quality and overall health.So, we're curious: When it comes to mattress firmness, what’s your pref... See more
Toilet: Rumbling / Vibrating Noise when FILLING up (SMOOTH when flush)
When flushing the toilet, no problem, smooth flush like all others, no issues. (My 1st inclination of the noise when filling up was a clogged toilet, but it flushes q... See more
Clean grout hard (iron) water stains?
We have a shower that has laminate side and flooring. The areas were grout is has turned orange/Black. I have used vinegar applied with toothbrush, Granite Gold grout... See more
How do I remove super glue from a rubber floor mat?
I spilled glue on my rubber floor mat and have tried alcohol, soap, goop and some other things, but nothing took it all away.
How to remove cigarette smoke smell from my sewing machine?
I just bought a used sewing machine. Brought it home and wiped it down with Clorox wipes and they were dirty. Now the machine reaks of cigarette smoke. I tried vinega... See more