Broken Dresser Leg, How to cut so all are same size?
Thought I could get a clean straight cut with my electric miter saw, but dresser/other legs are in the way and my blade can't come down.
So used a t to measure and make a cut with my jig saw, but not straight.
Then tried to make a cut with my circular saw, and same problem.
So now I have 4 legs cut, all different lengths. Noticeable......unbalanced, but not ALOT, just enough to make it not balance. And all the legs are a bit different. With each leg the back part is longer/shorter then the front.
These need to be evened out.....HELP, SUGGESTIONS WELCOMED!
-
Cynthia on Jun 24, 2013Take a string and wrap it around the outside of the legs. Attach a level to the string (clip on) to check the line. Mark and then take them to cabinet shop and pay for them to be cut. If you made a guide you could cut them by hand, but not as easy as you think. Pay the few bucks and have it done. Avoid home depot as they do not measure things accurately.Helpful Reply
-
Related Discussions
Best way to make your driveway look like stone with paint?
Several years ago there was a DIY video on how to do this but can't fine it.
Which room would you pick for a room makeover in your home?
We're curious, if you could redesign any room in your home, which is the room you would choose?Whether it's your cozy living room, your bustling kitchen, or even your... See more
What are your thoughts on painted brick: yay or nay?
Painting bricks can completely transform the appearance of a home, giving it a fresh, modern look or adding a pop of color to an otherwise plain facade.On the other h... See more
How to remove popcorn ceiling that has been painted?
Does having a paint over a popcorn ceiling change how I'd remove the popcorn ceiling?
How can I get evergreen climbing vines that don't attract bees?
Need privacy screen I can train on trellises for my patio. There's lattice there, but not enough to block out neighboring home. This is a mobile home. Would love flow... See more
I am gluing some colored glass gems onto a glass window..
I am using E6000 to attach the glass gems to an old window. I want to make sure that everything will stay attached. I plan on spraying clear Krylon onto the whole gla... See more
How do I get the black marks off my composite deck?
As we all know New England is getting hammered with snow this year! And I had so much snow on the deck that I had to use the snowblower to get it off. I'm anticipatin... See more