Problem with new grout. Additional question asked.
To add to above. This grout already contains a sealer, that is why you never have to seal. If the grout was not stirred properly or not at all when opened, could that affect the sealing properties in the mix?
-
KMS Woodworks on Jul 29, 2013Its my guess that this "darkness" is the start of some mold and mildew issues. A way to test this would be to scrub the area with a 1:4 mixture of bleach and water. You can check out this article I wrote for some other tips http://www.networx.com/article/start-cleaning-tile-grout-more-easilyHelpful Reply
-
-
Lynn C. on Jul 29, 2013Thanks for your suggestion. I already use the product 'Clean Shower' after each use. This grout is not suppose to have problems with mold or mildew. It does contain an antimicrobial also. Over and above that, it is only two months since it was completed.Helpful Reply
-
-
KMS Woodworks on Jul 30, 2013Most antimicrobial products don't do diddly squat in terms of reducing pathogens. The manufacturers sell this "hype" to uninformed and paranoid consumers. The bostic site states the grout needs to cure for a full 7 days before being subject to water, use or cleaners. The use of enzymatic cleaners will void all warranties, and the use of vinegar or acid cleaners is not recommended. As far as the "Clean Shower" product the active ingredients, and MSDS data is elusive. http://www.valdezlink.com/re/clean/cleanshower.htm I'm still thinking it is a early mildew / mold issue. Can you post some detail photos of the affected area compared to other non-affected areas? I did find a MSDS that lists the pH at 4 to 5 which is 100 to 1000 times more acidic than basic water. (Since pH is a log function) http://www.ahprofessional.com/msds/MSDS-127-CLEAN%20SHOWER%20DAILY%20SHOWER%20CLEANER.pdfHelpful Reply
-
-
Gail lichtsinn on Jul 30, 2013you need to contact the person who installed the tile and have him come look at it..He should be able to tell you whats wrong and if this is common problem..Or call a tile store and ask them..I would almost guess theres a few places where the gout does not meet the edge of the tile and water is getting behind it and wetting the grout..Might have a fungicide mixed in it also..Since you know the name of the product call the company who makes it and tell them whats going onHelpful Reply
-
Related Discussions
How do I replace rotting trellis?
I have trellis separating my garden, it has climbers growing through it. The trellis has started to rot and one post has snapped. What would you replace it with? I li... See more
I had soaked my gas stove top in bleach overnight.it has turned black
please advise on how to cleanThank you
Why are ants coming from under my toilet & around the toilet base?
There are these black ants coming from under my toilet and I don't know why. Food sources? Stagnant water? Bathroom flooring issues? I find these tiny ants in the toi... See more
Which room would you pick for a room makeover in your home?
We're curious, if you could redesign any room in your home, which is the room you would choose?Whether it's your cozy living room, your bustling kitchen, or even your... See more
Can I use a small power sander to remove paint from my porch?
Have painted it with outdoor Behr deck paint but it has flaked up. I got a lot of it up but need to get the rest off before repainting. Getting too old to get down ... See more