Leak in the tile around the bottom of the shower.
-
Woodbridge Environmental Tiptophouse.com on Jun 17, 2012If the water has been leaking for more then a few days, you have mold there. It takes around 48 hours for mold to begin to develop. The question is was the leak stopped? If so, and the tiles are secure and there is no stains coming through the wall, then the amount of mold present most likely is not enough to raise any real concern. However if you do see stains that has resulted from the leaks, or the area is prone to moisture then you need to open the walls and remove even the slightest amount of mold that has developed or it will continue to grow until it becomes a real health hazard. There are Boroscopes that are little cameras on the end of a flexible tube that can be inserted in a small hole to look and see if mold has begun. There are also tests using a wall check system that draws air out from behind the wall surface and impacts any mold spores that may be present where you cannot see them. But those methods are better left to your local mold testing company.Helpful Reply
-
Related Discussions
My shower is leaking. Do I call a plumber or tile person?
How do I tile around a one piece fiberglass tub/shower surround?
How do I tile around my tub and shower when the corners are not square
How do I clean off Black toilet bowl crust?
Hello, how or what can I use to clean the bottom of my toilet bowl? Is has a black crust
Do you recommend painting the inside of a fence?
I have a small patio and think about painting my fence on the inside so I can put some colorful decor up. Is this a good idea?
Why is there a noise coming from my electrical outlet?
I have noticed a noise coming from one of my electrical outlets. It sounds like it is buzzing. What could be the reason for this?
Painted wood: yay or nay?
Let's dive into the age-old debate: painting wood. Some homeowners swear by the transformative power of a fresh coat of paint on wood surfaces and furniture, while ot... See more