Leak in the tile around the bottom of the shower.
-
Woodbridge Environmental Tiptophouse.com on Jun 17, 2012If the water has been leaking for more then a few days, you have mold there. It takes around 48 hours for mold to begin to develop. The question is was the leak stopped? If so, and the tiles are secure and there is no stains coming through the wall, then the amount of mold present most likely is not enough to raise any real concern. However if you do see stains that has resulted from the leaks, or the area is prone to moisture then you need to open the walls and remove even the slightest amount of mold that has developed or it will continue to grow until it becomes a real health hazard. There are Boroscopes that are little cameras on the end of a flexible tube that can be inserted in a small hole to look and see if mold has begun. There are also tests using a wall check system that draws air out from behind the wall surface and impacts any mold spores that may be present where you cannot see them. But those methods are better left to your local mold testing company.Helpful Reply
-
Related Discussions
My shower is leaking. Do I call a plumber or tile person?
How do I tile around a one piece fiberglass tub/shower surround?
How do I tile around my tub and shower when the corners are not square
New concrete pour black stains?
We had a new 3500 sq foot concrete driveway poured starting 10 days ago. The first section poured has dark black spots that look like oil stains. Looks horrible, esp... See more
How to hide a pool filter?
Looking to hide this very hideous area. Thinking of a portable coat rack that you use when you have company. Bc it has wheels and can be moved easily.We still have to... See more
What could be causing a wet floor, if a plumber finds no leaks?
wet floor under sink dry iu and run water no leak? no smell all is clean. run water both tubs, garbage disposal, use sprayer everything underneath stays dry. Go away ... See more