I have large cracks in the plaster ceiling of 120 yr old house.
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
Will sun and rain change the miss color on our shingles?
We had our whole roof replaced with IKO Architectural shingles last week because of larger than golf ball size hail in early June. We used a highly rated contractor t... See more
How to remove urine smell from concrete?
Please HELP!!! Due to dogs, the urine smell in the concrete in out basement will knock you over. It is so bad you can smell it all through out our house. What is th... See more
Hard to say without knowing if it's a painted gypsum plaster or lime coating over brown coat and lath. You better have a pro look at it. Or call U.S. Gypsum there in Illinois. They have answers as they are the manufacturer of the construction products used back then and are really great folks willing to help you.
From experience with my own 1854 house, those cracks are caused by the house settling. I filled mine with wall putty, but about 2 yrs later they were back. Best bet is to cover the ceiling. You can buy vinyl ceiling tiles that look like ths 1890s tin tiles. No idea of cost.
My experience is that when there are large cracks in plaster the plaster has separated from the lath making it unstable and risking the ceiling falling own. If that is the case the best fix is to pull it down and replace it.
Buy some Joint Compound and special Tape used for dry wall. Prepare the ceiling by removing any loose paint, etc. Using a wide putty knife, spread some Joint Compound over the crack. Put the tape on the compound over the crack, making sure it sticks to the compound. Then cover the tape with more Joint Compound using the wide putty knife. The next day, when it is thoroughly dry, lightly "feather" it in using a fine sand paper. Dust off the area and put a coat of primer over the area. When that is dry, you can paint. I did the cracks this way in my house 20 years ago, and you still cannot find the cracks. Good luck.
I think you need to consider the safety issue. Perhaps you can find someone to help you determine if the plaster is in danger of falling. If it is, you might be able to sheet over it with sheetrock and make it safe. That isn't, however, a quick fix. If the plaster is stable and just cracked you can repair just the cracks with a plaster patch. Look for videos on U Tube. Remember the cracks are there for a reason and it would be unlikely a quick fix will last 5 years.
Working with plaster is not easy, yes scrape any loose paint but then you need to gouge out a deeper rut where the cracks are so the grout fills it it. I didn't use the tape just small amount of the plaster at a time until was smooth. For myself I know I do a horrible job of smoothing out over the tape. Just take your time. But I think the best way is to get someone in to put dryboard on top