I have vertical blinds one broke from the top plastic? How to fix?
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
Tips for updating or repairing Pella between the glass blinds?
Our 14 year old cord controlled blinds are all giving us trouble with raising and lowering and tilting. Many of the top mechanisms are coming unglued from the top. I ... See more
Brr! Drafty windows- how to cut the draft?
I have 3 sets of windows configured like this...very drafty, How to you winterize them? There is nothing in the corner to stick tape to. Thank you
You didn't finish your sentence but I assume one of the vertical blinds broke through the hole that holds it to the carrier. I had that happen and I took a pice of strong clear tape and put it over the top of the blind, punching out a hole to feed it back on the carrier. Since it was the end blind that gets all the pressure, I put the broken one in the middle and put the middle one on the end. The tape doesn't show and all works fine.
I had that happen also. The tape worked but didn't last. I actually turned the blind upside down, punched a hole in it, and hooked it up.
the blind broke off from the platic nowhere to hook it back up
Is the clip itself broken? If so, I would try and remove the piece that slides back and forth. Then you will not notice one is missing, for the most part.
You can order new ones, I have done that when I rented. Also, trim off broken end as little as possible, and punch new hole with paper punch. Place this one at the end of blind, then it won't be noticeable.
You can order new slats, which I have done when I rented an apt. You can also trim off the very least amount and punch a new hole with a paper punch. Place this slat at the end, where it won't be as noticeable.