How glue could you use to keep a threshold down?
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
Tips for updating or repairing Pella between the glass blinds?
Our 14 year old cord controlled blinds are all giving us trouble with raising and lowering and tilting. Many of the top mechanisms are coming unglued from the top. I ... See more
Brr! Drafty windows- how to cut the draft?
I have 3 sets of windows configured like this...very drafty, How to you winterize them? There is nothing in the corner to stick tape to. Thank you
You could try liquid nails
Try using E600 glue. It comes in waterproof. I'd put it on the screws if you have them and reinsert into the holes or on the flat part of the threshold. Or you can try using those plastic things that they use in walls that you use to hold a screw then screw the threshold back down.
I like Gorilla Glue. Does not take a lot and it does foam up as it is curing so you weight the threshold for a few hours. You would not need to worry about it popping up again.
Threshold should be nailed down with finish nails, countersink the nails, fill the holes. You can use some silicone caulk before nailing. Anything permanent would make it hard to remove in the future.
GORILLA
Is the subfloor wood? Could a couple of finishing nails thru the threshold into the hardwood floor side help? Pre-drill holes before nailing, especially if it's oak.
The living room side is wood. On the kitchen side, it’s tile. It’s only the living room side that buckled (due to A/C problem), that occurred right after buying house.
Thanks for all your answers. Most helpful
Thanks everyone