How to repair holes in a metal front door
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
How to repair holes in metal door?
Just replaced blinds on metal door. Have to cover old screw holes. What do I use to fill holes before repaint.?
Front door (metal) has gaps between the door and frame. How do i fix
Our front door (metal) has a lot of gaps between the door and the frame allowing cold or hot air to come in. How do I fix that?
Bad homeowners. In my state, you're not allowed to remove anything that is screwed in as this rod was. However, you can repair it with metal bonding filler. Click the link below to see how to do it safely. Wishing you the best.
http://homeguides.sfgate.com/fill-holes-metal-door-37991.html
Use bondo for car repairs. You add a tiny bit of one from a tub to a good dab from the jar/can and mix thoroughly; then push it into the hole and trowel a bit over the hole let dry and sand, when you get it flush, paint. It's just like holes in sheetrock only you have to use a different product.
Auto body filler as Mesqlouise2u suggest or a two part epoxy putty.
Car bondo then sand.. and paint . Utube it to show you how.
thanks everyone for your suggestion!
your time & help is greatly appreciate!
Bondo! And sand it.
You're welcome. Good luck!