How to I attach a large pegboard to a wall, and make sure it stays up
![Marie](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-M-59A1F4.png?size=91x91)
![](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-A-FF9646.png?size=50x50)
![](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-K-F1C40F.png?size=50x50)
![](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-M-59A1F4.png?size=50x50)
Related Discussions
Blackout curtains behind vertical blinds
![Diane](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-D-605BE8.png?size=50x50)
I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba... See more
How to make a balloon garland?
![Noemi](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-N-FF00A7.png?size=50x50)
Does anyone know how to make a balloon garland or a balloon arch?
How can I safely remove a photo that's stuck to the glass in a frame?
![To Work With My Hands](https://cdn-fastly.hometalk.com/media/profile/2017/04/12/2977689_3.jpg?size=50x50)
Occasionally I've had the problem of photos sticking to the glass inside frames. First, I'm not sure what's even causing it. I don't use any moisture when dusting the... See more
How can I make this hidden door more hidden and less hideous?
![Kristy Williams Tillman](https://cdn-fastly.hometalk.com/media/profile/2014/10/28/1368536.jpg?size=50x50)
I have a hidden door though it doesn't look so hidden at the moment and I like the appeal of a hidden door. We do need to use the door, but not often. This is in a b... See more
How can we camouflage the siding in our add-on room?
![Diamondvalleygirl](https://cdn-fastly.hometalk.com/media/profile/2015/03/25/2711806.jpg?size=50x50)
We live in a mobile and have an add-on room where a covered patio used to be. Now it's part of our living space and we would like to cover or camouflage the exposed a... See more
Would someone tell me what I'm doing wrong with command strips?
![Linda Valentine](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-L-1ABB71.png?size=50x50)
First one fell off in the bathroom - okay, maybe moisture. In the kitchen - fridge, inside cabinets and on tile walls. All fall off. Everyone else seems to love them!... See more
How to hide this circuit breaker?
![Nilsa Cintron](https://cdn-fastly.hometalk.com/media/member_1315375484372352_1315375484_1919644032_n_f81b5a30f46390c714795cb88195e16d.jpg?size=50x50)
Entry way update. I bought a co-op and started renovating but am stumped as what to do with the entryway. The circuit breaker box is smack in the middle how the heck ... See more
I'd use an adhesive caulk on the back, then use screws along the edge.
We attached ours to sheetrock using wood screws with washers going into the studs behind the sheetrock. We knew it would be getting heavy use, so we wanted it to stay up permanently. It's been years and no sign of coming down!
Before hanging, Mark, on ceiling or high on wall, where your studs are so you’re only screwing into the studs.
Your first step will be to firmly attach 1”X1/2” wood slats or shims to the back of pegboard, top and bottom. If you attach directly to the wall, you won’t be able to use pegs - they need space behind the board To click in. I would then predrill holes in the frame to align with studs, then hang, screwing in top and bottom. Pegboard is heavy. Predrilling your holes will make it way easier.
attach a piece of 2x2 wood (length of the piece of pegboard) on each side and in the middle of where you wish to place the pegboard...anchoring into the studs or by using wall anchors for strength. Then screw the pegboard into the pieces of wooD
Thank you all for your help!
We just did this last weekend. We ended up using the metal pegboard, it was more expensive then the big cardboard type kind. We did it because we felt it would last longer and because we can just keep adding to it in increments. Also you get to skip a step of putting wood behind it, so it was up in about 15 minutes.
all good ideas. One of them is sure to work for you.