Tips on blending textured ceiling patch?

+7
Answered
  5 answers
  • Rose Broadway Rose Broadway on Mar 10, 2018
    This looks pretty easy, I hope it works for you.

  • William William on Mar 10, 2018
    I use a 1" paint brush and no shrink drywall patching compound. Dip the brush in the compound about 1/4 way then stipple the ceiling.
    • Bonnie Bonnie on Mar 11, 2018
      Thanks William. Never thought of that. I’ll try it to see if it matches.
  • Bryan Bryan on Mar 11, 2018
    impossible always look like a patch scrape the rest of the ceiling
  • Laura Cooper Laura Cooper on Mar 11, 2018
    It's not impossible. I've done it successfully where you can't even tell where the patch was. First identify your finish. Is orange peel, knock down, etc. For some of these finishes they sell aerosol cans of the texture you need. Then practice on a board a little to get down the technique to match your texture. After texture, let it dry, prime and paint.
    • See 1 previous
    • Laura Cooper Laura Cooper on Mar 11, 2018
      Yes, take a picture. We might be able to id it on here. Also, I failed to mention that you will need to feather the texture into the old. So you gradually get less texture as you cross over areas of existing texture. Your final area will be much bigger than your repair
  • William William on Mar 11, 2018
    Your welcome. I found it's easier to control the texture using the paint brush than an large sponge.
Your comment...