Is it pretty simple to texture walls? What if there is exposed drywall
Related Discussions
Vinyl plank flooring vs pergo (laminate)
I currently have stinky dirty carpeting in my living room and I want to replace it with a durable flooring that can stand up to dogs and kids.
How to remove popcorn ceiling that has been painted?
Does having a paint over a popcorn ceiling change how I'd remove the popcorn ceiling?
How to apply peel and stick wallpaper?
I want to spruce up my walls with peel-and-stick wallpaper. Has anyone used this before and can advise me as to how to apply it properly?
How to stain wood floor?
I've heard staining is a good technique for updating floors. So how do I stain my wood floor?
How do I fix wallpaper that's peeling off?
The wallpaper on the corner of a wall in my house is starting to peel off. Any advice about the best way to glue it back?
How to seal the seams of vinyl wallpaper?
We are renovating our guest bathroom. We put up vinyl wallpaper along the tub/shower wall. I am not worried about the wallpaper itself getting wet because it is viny... See more
http://www.planitdiy.com/how-to/painting-decor/how-to-repair-drywall/
you can skim coat it with drywall mud and then do a light sanding so that it evens out. Basically, all you do is put drywall compound on a trowel, cover the entire area so that the recessed part is as high as the rest of the surface, let it dry and then sand it. You may need to do more than one coat, but always sand in between. Then prime it before you paint
Here's so more info that may help you. https://www.lowes.com/projects/repair-and-maintain/patch-and-repair-drywall/project
Google or YouTube search diy paper bag walls! They are easy to do and look good of you do them right!
put a skim coat of drywall plaster and seal with primer.
https://www.youtube.com/results?search_query=how+to+texture+drywall
Use joint compound and put on with a trowel . After it dries you can just paint no sanding required.
You need to cut out those loose edges...maybe using a one edge razor blade carefully before you do anything else.
I had the same problem with a small half bath. I refused to have sanding of compound in my house...I did not want all that dust in the vents! We put pre-primed bead board at the bottom, left a few inches uncovered; and then used "texture paint...this requires a special "texture paint roller" that you can buy at the big box store when you get your paint.
Just make sure you paint straight up and down and then cut a small stiff brush bristles off to a tool to stipple the corners and the area next to the ceiling. DO NOT texture in the space you left vacant for the flat molding.
MAKE SURE you allow a few days for this to dry before you try to paint it. And paint both the top and bottom before you put on the molding and baseboards
I picked a darker color for the beadboard and a lighter color on the color sample for the top. It is actualy a very pretty peachy color that does not show up as pretty as it really is!
We then put up a white chair railing with small accents in the corners...this allows you to fit molding to the corners without having to miter them as a straight edge butts right up to another straight edge. These can be sawed shorter if you use smaller molding...I cut about 1-1/2" off of mine.
This has been up for 8-10 years and I LOVE IT! I don't think it would serve as a good backsplash but in a kitchen, nothing but something waterproof and scrub proof works there.
Before you cover exposed area you need to seal the raw paper. If you apply joint compound directly to the raw paper there is a good chance the moisture in the compound will cause the paper to bubble. I have tried several sealers over the years. I have had the best luck with a sherwin Williams product by the name of RX35 sealer. Goes on like paint with a roller or brush. I suggest using a cheap roller cover or brush and then just throw them away. It’s almost impossible to clean them good enough for reuse. Good luck with your project.
I'm sure someone a long long time ago asked that very same question with brick and mortar. I can imagine you will be one of the new idealists with this style. If it meshes well with your decor, why not!!!!
For a unique texture, put the joint compound on the wall thick and spread it with wadded up newspaper.