How can I apply state maps to wood panel walls?
Related Discussions
Blackout curtains behind vertical blinds
I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba... See more
How to make a balloon garland?
Does anyone know how to make a balloon garland or a balloon arch?
Can I put wallpaper or even contact paper on paneled walls?
All walls are have paneling. Want to change a few walls, but easily with limited cost.
How can I make Native American wood wall art 64"×15"?
I need some ideas for wood wall art 64"×15". Kind of like this.
How can I make DIY wood wool panels?
Hi, Does anybody know how I could make wood wool(fibre) panels? I know it is a mixture of wood wool and cement. But that is also everything i know...https://mymodernm... See more
Can I used a nailer to attach wood planks to cinder block wall?
How can I safely remove a photo that's stuck to the glass in a frame?
Occasionally I've had the problem of photos sticking to the glass inside frames. First, I'm not sure what's even causing it. I don't use any moisture when dusting the... See more
It would work. But I would use spray adhesive.
Right apply spray adhesive to back of the maps, hang each map on wall, (use a bit of painters tape at corners to hold until adhesive is dry, remove the tape). Then top coat with some sort of lacquer to seal the maps from dirt & dust. Good luck with that. Sounds interesting.😉
Absolutely, however, polymer will work just as well.
Using a rubber brayer to remove air bubbles and to get the paper as flat as possible against the backing, is recommended.