Is there a “trick” to getting molded laminate off kitchen doors? T
Related Discussions
Vinyl plank flooring vs pergo (laminate)
I currently have stinky dirty carpeting in my living room and I want to replace it with a durable flooring that can stand up to dogs and kids.
How to remove popcorn ceiling that has been painted?
Does having a paint over a popcorn ceiling change how I'd remove the popcorn ceiling?
How to apply peel and stick wallpaper?
I want to spruce up my walls with peel-and-stick wallpaper. Has anyone used this before and can advise me as to how to apply it properly?
How to stain wood floor?
I've heard staining is a good technique for updating floors. So how do I stain my wood floor?
How to makeover an ugly metal entrance door?
My entrance door is metal with a small openable window, how to update or make it look nice?
A link attached may help with the process. Also try youtube you may find others have documented their experience. Good luck
https://cuckoo4design.com/peeling-kitchen-cabinets/
You may be ahead to keep the laminate on rather than removing it. Rough it up with a medium coarse sandpaper, then a finer one and then paint as you wish. Here's a link providing the steps. https://www.bunnings.com.au/diy-advice/paint/how-to-paint/how-to-paint-laminate-kitchen-cabinets
I’d be tempted to try A hair dyer to soften the glue.
I have never really found a good work around. I have heard pulling or breaking a small amount off then using heat from a hair dryer on the glue, or paint thinner like goop off. I have not tried it though. The other option that might be a bit less work is to sand it down (power palm sander would work best) then after you have as somewhat rough edge prime and paint over it. Might not be as smooth a finish as you were hoping for but it would look ok.