I will have a pump in the bottom and water will recirculate from the middle and lower bowls.
What product is out there that when applied will make this water tight
I'm making a DIY fountain from a 3 tier planter. I used silicone to make a water tight seal around the joints where each level secures together. However, it is NOT water tight and looses water.
What product is out there that when applied will make this water tight?
Thanks,
Michelle V
Pekin IL
Related Discussions
What to do with our livingroom ceiling?
We took the old popcorn ceiling off in our livingroom and thought we could just paint it. We fixed some hairline cracks where the joint in the sheetrock are, primed a... See more
Cheapest way to make a large retaining wall
I have almost 1/3 of an acre backyard that I will be re-establishing soon, and one of the projects will be a 2-3 ft tall retaining wall that will be approx. 25 feet ... See more
I am looking for someone to build me a pergola
I have a cement patio and want to have someone with experience build a pergola with a deck over the patio. I have a picture of just the one I would like that I found ... See more
How can I repair a rip in my canvas gazebo?
I have a 10x12 gazebo bolted to my deck. It is domed so it is very tall. I was trying to take the top down this Fall and accidentally ripped a hole in the canvas. Th... See more
Would it look right to put an outdoor kitchen under screened pool?
I just moved into this house coming from a house in the country from lots of land; so this type of home is very new to me. It's a typical Florida home with a screened... See more
Sandbags for landscaping
Has anyone ever used sand bags to border a driveway or flower bed ? We are buying a place in the woods with no sidewalks ( yet ), no paved drive way ( yet ). I was ... See more
have you thought of flex seal? It’s in a handy spray can, I think they also have brush on and maybe tape, I have only used the spray, I love it
I would use a two part epoxy. Mix it per directions and pour some around the joints. It will seep into and fill the gaps. Also provede extra support. Flex Seal breaks down over time. Has been tested in different applications and does not last.
https://www.homedepot.com/p/Loctite-0-85-fl-oz-Quick-Set-Epoxy-1395391/100371815
We have used the tape, spray and the caulking type stuff. It works and lasts and lasts. every time.
JB Weld waterproof putty! I have used this on my toilet and water fountains! I will be using it again for my newest water fountain as soon as I get a longer tube!
you can go to a marine store and they have water proof caulking that will seal even under water.
Spray on Flex Seal paint. It comes in colors and clear
Marineland aquarium sealer may work well. But you will need to scrape any silicone sealer off first. I've found flex seal to work very well in leaky skylights and a rain barrel bottom.
How about spray foam insulation in a can?
Flex Seal
Although commercials a irritating this stuff works. I know because I've used it.
Hi Michelle! I use JB Weld Waterproof putty and it works great! Being a putty you can form it around the holes and tube. It will make a tight seal! Good luck and would love to see your finished work!
Try a silicone sealer used for aquariums.