Tools? What is your favorite and most trusted brand of tools?
![OceeB](https://cdn-fastly.hometalk.com/media/profile/2018/04/21/31915973_1.jpg?size=91x91)
![](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-W-F1C40F.png?size=50x50)
![](https://cdn-fastly.hometalk.com/media/profile/2016/08/11/4361452_1.jpg?size=50x50)
![](https://cdn-fastly.hometalk.com/media/profile/2015/07/28/747080_1.jpg?size=50x50)
I am slowly building my tool collection.
What is your favorite and most trusted brand of tools, most used piece of equipment, dual use tools and is there anything that you regret buying?
Related Discussions
Why is it important to wear a mask when sanding?
![Liz](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-L-FF8282.png?size=50x50)
You said you had a bad experience from sanding without a mask. Could you give me any info in that so I can encourage my brother to use one
Has anyone been able to locate "Wood U Bend Moulding" in the US?
![Pg](https://cdn-fastly.hometalk.com/media/profile/2015/05/18/1696666_2.jpg?size=50x50)
There is a molding being sold in England, at least, called Wood U Bend. It can be heated to allow bending. I have not yet found a source from which to get it in the U... See more
What kind of saw did you use to cut the dresser in half?
![Kim](https://cdn-fastly.hometalk.com/media/profile/2017/06/15/1578774_1.jpg?size=50x50)
How do I make a template to drill holes for cabinet hardware?
![Leslie Espinosa](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-L-FF8282.png?size=50x50)
We had cabinets installed without hardware. Now we want handles and knobs but will need to put them on ourselves.
Caulk gun? what am I doing wrong?
![1cs1267](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-C-F1C40F.png?size=50x50)
I'm a senior, attempting to use caulk gun for the first time. Have my "cannister" of caulk, cut the top off ... nothing will happen. Takes all my strength to "pump"... See more
What are the best screws for use on corrugated metal?
![1cs1267](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-C-F1C40F.png?size=50x50)
I am putting up a backsplash using a sheet of new corrugated metal. What is the best type of screw to use for attaching this to the studs on the wall? I need somethin... See more
We have lots of tools and equipment by Kobalt. Milwaulkee and Porter Cable, and you can't go wrong with DeWalt. We have all these brands, but mostly Kobalt.
De Walt
Depends on what kind of projects you are interested in doing. My husband likes Porter Cable for electric tools, Stanley for hand tools, and Garrett-Wade for fine woodworking tools. My husband is a sculptor and at times a fine woodworker but he also does most of our repairs. He spends a lot of time caring for his tools and buys some at estate sales and yard sales.
Most of my tools are hand me down items from my dad and my ex hubby who was an engineer. If I buy a tool, first place I look is Snap On. Expensive, yes, worth it, absolutely.
https://www.snapon.com/EN
Dewalt, Porter Cable, Ryobi, Skil.