Finishing Woodworking Projects

by David Hays

Answered

I have just gotten into woodworking projects and need to know the best way to finish my projects to get the best results (poly-coat, lacquer, etc.). Any types and techniques will help greatly!

Pallet End Table

Pallet Bar

3 answers

Cindy Hagemann on Jul 28, 2018

These are nice! My favorite sealer is a water based polycrylic from MinWax in a blue can.

Helpful Reply
- See 2 previous
- David Hays on Jul 28, 2018
  
  Thank you! I will try it out, and when applying the coat, do you roll it on or brush? And heavy or light coats?
  
  Helpful
- Cindy Hagemann on Jul 28, 2018
  
  I do two light coats - but keep in mind that this is raw wood and the first coat will sink in quickly! I apply with a brush usually but have done table tops that I want smooth - with a cotton sock or rag.
  
  Helpful
- David Hays on Jul 29, 2018
  
  I will try it out and report back on how it went! Thank you so much for the information!!
  
  Helpful
Elizabeth Dion on Jul 28, 2018

Poly is notorious for yellowing over time. The finish would depend upon what the piece will be used for. I like to use this...

Helpful Reply
- David Hays on Jul 28, 2018
  
  I’m using it for tables, bars, stands and things that people will be touching so I need a good, smooth coating. I do some wall art also, do you have a suggestion for that?
  
  Helpful
William on Jul 30, 2018

Beautiful work. Twenty plus years a woodworker. I have always used Minwax polycrylic. Water based, dries fast. Doesn't yellow. At least three coats. I use a quality foam brush. Not from the dollar store. They shred. No streaks, brush marks.

Helpful Reply
- David Hays on Aug 02, 2018
  
  Thank you William! I put one coat of epoxy liquid glass on the bar top but still need to apply one more coat. For the rest of the bar I’ll try your method!!
  
  Helpful

Related Discussions

Did anyone out there build a DIY pergola... tips?

Lisa Answered on May 28, 2024

See Answers

Can I ask Home Depot to cut my wood?

Miriam Illions Answered on Sep 30, 2022

I'm seriously considering making this twisty side table that I fell in love with here on Hometalk (By Chasing A Dream), but cutting the wood is a bit too ambitious fo... See more

q can i ask home depot to cut my wood, diy, how to, woodworking projects

See Answers

What to do with our livingroom ceiling?

Kathy Wilson Answered on Feb 25, 2024

We took the old popcorn ceiling off in our livingroom and thought we could just paint it. We fixed some hairline cracks where the joint in the sheetrock are, primed a... See more

See Answers

What type of hinges are used on the top of this folding table?

Tina R. Answered on Oct 20, 2023

Does anyone know what type of hinges are attached to the top of this folding table? The legs fold in toward the back then the top folds down flat against the legs.

what type of hinges are used on the top of this folding table

See Answers

How would I be put on these wheels ?

Ddu14198807 Answered on Jul 04, 2023

I am planning on doing a mobile wood bench using 2x4. I have these wheels but have no clue to put them on

See Answers

Sealing/smoothing crate wood

Jessica Hill Answered on Mar 24, 2024

I am turning the sides of an old wooden crate into a coffee table top. The wood is similar to pallet wood: unfinished and prone to giving splinters. How might I go ab... See more

sealing smoothing crate wood, The crate in question

See Answers

How do I make DIY furniture sliders to move heavy furniture?

BERNICE MEROLA Answered on Apr 07, 2024

HOW DO I MAKE FURNITURE SLIDERS TO MOVE HEAVY FURNITURE.Best furniture sliders!Move furniture easily with Round furniture moving kit that Amazon reviewers swear by!

See Answers

Finishing Woodworking Projects

Suggested Project Book

Forget Your Tree! This Will Make You Rethink Where You Hang Ornaments

Other

More

Finishing Woodworking Projects

Suggested Project Book