How do I attach this type of key hole shelving
I once saw a site showing how to attach this type of shelf FLUSH to the wall. When I hang them, the back edge falls forward and does not touch the wall. Looks horrible.
Related Discussions
Any ideas on how I could use leftover lattice? Inside decorating?
I have leftover lattice and would like to use it for some sort of indoor decorating project. Any ideas on a good use for it? It looks like this, just plain unfinished... See more
Planting under shady tree with roots
I have a jacaranda tree in my front yard with roots growing above ground. The tree has fern-like leaves that have prevented little growth of grass underneath. What ca... See more
Alternate way to install kitchen shelves that doesn't include drilling
I want to display my bowls, and other colorful accessories in my tiny tiny kitchen. There are no cabinets! Except those very high ones that i can’t reach! So all I ... See more
How do I remove a floating shelf?
Hello! We moved in to a new house and the previous owners had installed some floating shelves. How we we can’t work out how to take them off. We’ve tried pulling ... See more
Where to purchase insert tubes that go between plastic shelves?
Does anyone know where I can purchase these tubes? The manufacturer does not sell them separate from the shelves. I also cannot find PVC pipe at 1 1/8" to cut to fi... See more
What should the height/spacing be between 3 shelves in a living room?
Want to hang 3 shelves roughly 29 inches long/ 6 inches high. I’ve got 8 foot walls, cathedral ceiling. We up cycled some old barn wood and some metal troughs. Used... See more
https://www.bing.com/search?q=How+do+I+attach+this+type+of+key+hole+shelving&qs=n&form=QBLH&sp=-1&pq=how+do+i+attach+this+type+of+key+hole+shelving&sc=0-46&sk=&cvid=13A5CC3870E2403EBC9BF925CF14F6B0
https://homeguides.sfgate.com/hang-shelf-keyhole-39484.html
https://www.hunker.com/13402997/what-is-keyhole-mounting
https://www.thisoldhouse.com/how-to/how-to-install-wall-mounted-shelves
How is it attached to the wall? Screws? Can you post a picture of the back?
I've had the same issue. I used shims at the bottom of the shelf to push the top up against the wall. It worked quite well.
There seems to be any number of videos on the subject on YouTube. Perhaps you'll find one that addresses your issue: https://www.youtube.com/results?search_query=how+to+attach+keyhole+shelving
Love your throw/blanket/bedspread, where did you get it?
Hi Carolyn! I use clear plastic bumpers made to prevent cabinet doors from banging, to stick on the bottom of anything that can scratch a table top and to help wall frames grip the wall so pictures stay straight. For shelves, I place as low on the back as possible to hold the shelf straight and in from the outside edges so they are even less noticable.
They make some of these bumpers rounded so they are thicker and some thinner and flat on top.
I find them with picture hanging hardware in most stores. I always keep some in my tool box.
Also with those keyhole hangers you need screws with straight backs on the heads, heads that just fit in the round part of the keyhole and screw it into the wall as far as possible and still be ableto catch the keyhole. Getting the screw in far enough but not too far can take a few tries. Be sure to pull down once you've hooked onto the screws to lock in place on the slot part.
I like your shelf!