Fixing water damaged seams in laminate flooring ?
![Lynn](https://cdn-fastly.hometalk.com/media/profile/2015/08/31/227157_1.jpg?size=91x91)
![](https://cdn-fastly.hometalk.com/media/profile/2015/06/21/223178_1.jpg?size=50x50)
![](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-C-FF8282.png?size=50x50)
![](https://cdn-fastly.hometalk.com/media/profile/2018/04/09/3701121_9.jpg?size=50x50)
We have some laminate floor where bad doggie peed on table leg and the floor has bubbled up at seam. Can this be sanded and sealed with a water sealant? Or what can we do without replacing flooring. Trying to make it last a few years longer before planned major renovation.
Related Discussions
How to get rid of mice?
![Jessica Hill](https://cdn-fastly.hometalk.com/media/profile/2021/08/22/107358_1.jpg?size=50x50)
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
![Abby](https://cdn-fastly.hometalk.com/media/profile/2021/02/07/50639059_1.jpg?size=50x50)
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
![Sharon](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-S-59A1F4.png?size=50x50)
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
![Frisco's Cards](https://cdn-fastly.hometalk.com/media/profile/2017/01/27/18563525_1.jpg?size=50x50)
How do I fix squeaky hardwood floors?
How do I camouflage water damaged laminate flooring?
![Rose](https://cdn-fastly.hometalk.com/media/profile/2015/10/17/2237031_1.jpg?size=50x50)
The edges have swelled and are curling. I do not have replacement piece. Could I sand the edges down and paint it or stain them?
If the seam has heaved up there is not much you can do. The wood composite product under the wear layer has swelled up due to moisture and once that happens it usually doesn't shrink back. You could try to sand it and seal it but you would be able to tell
. Maybe you can try to sand it and then cover it with a rug.
I don't guess you save your scrap pieces? Not much you can do but try to hammer it down, buy a rug.
If the subfloor, is OSB, and that has swelled up and is flaking, then there isn't much you can do. If it's just the seam that is unglued, then glue it back down. I also like Kelli's idea of a rug, if there isn't a hump in the floor.
Understanding what the laminate is made of will help you as you consider your options. The product on top is basically as plastic type cover and very thin. The product underneath is a composite that deteriorates with moisture, swells and thus you have the raised flooring. I suggest (& I don't know if it will work or not) using another piece os scrap wood to place on top of it and see if you can flatten it with a hammer. That way you will not ruin the top of the floor. Sanding will destroy the finish that you are trying to preserve. If you do manage to get it to flatten out, go to somewhere like Lowes or Home Depot and see if they have something that you can use to seal the seams with so that moisture will not go down into the seams in the future.
If you don't have a replacement plank, you can check in Home Depot or Lowes or Lumber Liquidators to see if they have something close to your flooring and then cut out the bad laminate and replace it with what you've found. Many times, these stores have laminate that people didn't need and returned for store credit. They then sell it for much less than the original price. It's worth it to keep some on hand, just in case you have any future 'accidents'.