What kind of roller should I get?
It's a fiberglas door and the paint color is a gloss deep red. I've read that using a roller is better than a brush to get the smoothest surface, but then at Lowe's I see foam rollers and ones that aren't foam and they all say they do the best job. What kind of roller SHOULD I get? Or is a roller the best tool to use?
Related Discussions
Should I paint or stain my oak kitchen cabinets?
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ... See more
How to paint a metal front door?
How do I paint my front door? It's metal.
How to paint grout?
How do I paint grout to change the color? The grout is in great shape, but the color - meh.
How to whitewash a brick fireplace?
What is the best method to whitewash bricks surrounding a fireplace?
What kind of paint should I use on a tumbled marble tile backsplash?
What kind of paint should I use on a medallion?
Looking for some ideas on how to paint a medallion for my dining room. Do I paint same as trim color or dress it up? What kind of paint also. Thanks.
Brush for insets if you have them are a must. (panels) Either brush or roller will work. Regular nap is fine. Large or small is fine. It all comes down to preference. The roller goes quicker especially if the door is flat.
I like the small white dense foam rollers. They will give you a smooth finish. However--you do want to make sure that you don't keep rolling over and over your paint as this will leave roller marks if you decide to go back and touch up--I would think even more so with glossy paint. Do a thin coat pf paint--and let it dry very well before you do the second coat. The paint should level itself to a nice smooth finish if you can stop yourself from touching up before it dries!
Yes - Gk hit the spot with foam rollers - Use a good quality angled brush for the insets if your door has them. The better quality the paint and primer, the smoother your door will look. Do not try to brush or roll the paint too thin.
Make sure you take the door off it's hinges. Lay flat on a pair of wood horses. The sides of the door are really critical as if you do it and there's too much paint your door could be permanently closed for good. Preparing the door for painting is also very important. If possible contact manufacturer for suggestions. Hope this helps. Good luck!
Love the color. I have to wait for my new doors. This house was built in the late 70s. So HoLLow doors, for the exterior? #@**. Plus the doors are a half inch short. I know, go figure why ANY home builder would do this. Happy painting
We restore houses and I found that spray painting the outside doors is the best way to go. Lay door flat on saw horses with an old blanket on them, take off all the hardware, tape off the windows if applicable and sand. Clean off dust with a tack cloth and you’re ready to spray. If you need to give them a second coat make sure to lightly sand and clean before doing so. This is very important. It takes several days (making sure one side is completely dry before turning the door over) but it’s worth it.
What if your door is steel?
Hi, I prefer the fluffy rollers, mainly because the foam ones seem to track where you have rolled them and, this then causes you to chase your work and slows you down greatly.
Now I'm so confused. Two men who work at HD told me to use foam rollers, telling me they'd give me a smoother surface. Then people here also say foam but others say not foam. How's a person to make a decision? I painted some kitchen cabinets a few years ago with oil paint and used foam rollers. Most of the paint looked fine but some places showed the roller lines and I think that's because I went over the paint too much like someone on this post about warned about. I have a sprayer that I bought a few years ago but have never used. It seems like the clean up of it is a chore. I like simple things. I LIKE simple things but few things seem simple once I get started on it. Sigh. Woe is me. 😩
Make sure you use a primer first. I don't like roller marks or brush strokes so I paint with a roller and then I use a brush that has very little paint on it and make a brush stroke from top to bottom in one stroke. I continue going from top to bottom. It is very smooth that way because you don't have thick and thin areas of paint. Of course, in some areas you have to use a brush.
Living alone theres no way I can remove the doors in order to paint them by myself and don't want to hire someone to do it. Ive painted my front door while its still up with no problem. Also had a pro painter do it this way too. Don't put too much paint on roller in order to avoid drip marks. Less is more. Rather do several coats with a thin coat than deal with paint drips. Let each coat dry in between. I prefer the sheepskin rollers. They absorb better than the foam rollers. Do inserts first if you have then on the door that the flat areas.
There’s no way in H-E-double hockey sticks, that I would take my door down just to paint it. I’ve painted pots beautifully while still on their hinges and my painter, Kevin, touched up all my exterior doors. And as far as roller, no roller, etc. Use what the manufacturer of the paint company’s tips on their website. Then call a highly
rated Painting Crew for some free advice. Then it’s all up to you to decide what’s best.
The only painting tip I might say to you, is to work with thin layersas it’s easier to add more paint than to have to take it off.
www.hometalk.com
We have rental property and do most of the work ourselves, painting doors is my job. I use a foam roller and have a brush on hand. I don't take the door down to paint. Most of our doors are generic 6 panel metal doors. I begin at the top using roller or brush to load paint in top two recessed part of the insets then paint the raised part of the insert rolling over the already painted low areas to level our the paint and lapping onto the "border" outside area, then finish the remaining border and move down to the next two panels and repeat.
It's handy to have a piece of cardboard to keep from bumping off the door around the edges