How do I find stud in walls?
![Mike](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-M-605BE8.png?size=91x91)
![](https://cdn-fastly.hometalk.com/media/profile/2017/05/08/23279289_1.jpg?size=50x50)
![](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-O-FF8282.png?size=50x50)
![](https://cdn-fastly.hometalk.com/media/profile/2018/06/25/33671008_1.jpg?size=50x50)
I tried a stud finder
Related Discussions
How do I install board and batten utilizing metal studs?
![Marla](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-M-F1C40F.png?size=50x50)
My home has metal studs and my hubby is concerned that it will be too difficult to attach board and batten to these studs. Will I have to use screws? Or would a nail... See more
How do I put up shiplap on an old, uneven, plaster wall?
![Beth](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-B-BC70FF.png?size=50x50)
I live in a house that's over 100 years old. I have a kitchen wall that I want to shiplap or put peel & stick faux shiplap, but it is plaster and the roof is uneven.... See more
How do I install shiplap on a wall with an outlet?
![Christy](https://cdn-fastly.hometalk.com/media/profile/2016/02/16/4613737_1.jpg?size=50x50)
I want to shiplap my entry wall about 3/4 the way up with a picture ledge and coat hooks. I’ve wanted to do this for 2 years now. Looking at different products, p... See more
How do I remove ink from wall and laminate floor??
![Mary](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-M-FF8282.png?size=50x50)
Apparently my nephew busted a green ink pen and managed to get it on my walls which are painted with a semi gloss interior paint and my laminate flooring. I have trie... See more
Do I need to the find studs in a lathe & plaster wall when installing bead board paneling?
![Jean](https://cdn-fastly.hometalk.com/media/profile/2021/08/22/38713_1.jpg?size=50x50)
I'm using liquid nails and a nail gun to install.
What is the best way to find a stud behind a paneled wall?
![Bill Kratz](https://cdn-fastly.hometalk.com/media/profile/2017/01/27/18567194_1.jpg?size=50x50)
Ok, what did not work on the stud finder?
A. Put a Plastic cup to your ear
B. Knock Gently on the Wall until your knock on the wall doesn't Sound Hollow.
C. Mark that spot with a Pencil
D. Keep knocking and repeat A until you found them all.
Look at the Trim. Since the baseboard is attached to the studs, look to see if you can spot where it might have been nailed.
What is the composition of your walls? Not all stud finders work with homes built in the 1920's/1930's, due to wall thickness and composition.
I’ve used a magnetic stud finder on drywall. It worked fine for me. I did however have to move the stud finder vertically & horizontally. Once I found it vertically, it was easy to find the rest horizontally! Hope this helps!