How do I attach shelving to a metal shed so that it doesn't leak?
Hi Guys! I recently purchased a home with a 10x10 metal shed. How can I attach shelving inside without causing the walls to leak (rains quite a bit here). Have the shelving, need to know the technique. Thanks!
Related Discussions
Any ideas on how I could use leftover lattice? Inside decorating?
I have leftover lattice and would like to use it for some sort of indoor decorating project. Any ideas on a good use for it? It looks like this, just plain unfinished... See more
Planting under shady tree with roots
I have a jacaranda tree in my front yard with roots growing above ground. The tree has fern-like leaves that have prevented little growth of grass underneath. What ca... See more
Alternate way to install kitchen shelves that doesn't include drilling
I want to display my bowls, and other colorful accessories in my tiny tiny kitchen. There are no cabinets! Except those very high ones that i can’t reach! So all I ... See more
How do I remove a floating shelf?
Hello! We moved in to a new house and the previous owners had installed some floating shelves. How we we can’t work out how to take them off. We’ve tried pulling ... See more
Where to purchase insert tubes that go between plastic shelves?
Does anyone know where I can purchase these tubes? The manufacturer does not sell them separate from the shelves. I also cannot find PVC pipe at 1 1/8" to cut to fi... See more
What should the height/spacing be between 3 shelves in a living room?
Want to hang 3 shelves roughly 29 inches long/ 6 inches high. I’ve got 8 foot walls, cathedral ceiling. We up cycled some old barn wood and some metal troughs. Used... See more
Glue and wedge 2X4's on the flat to the shed walls. Construction adhesive should work. The attach the shelving to the 2X4's.
We put freestanding shelving units in our metal shed. That way we can reconfigure them as needed.
Why not just use free standing metal shelves ?
U could try caulking around each nail/screw hole! Maybe spray whole outside with clear flexseal!?
The walls on metal sheds are not sturdy enough to hold shelving. I suggest you purchase plastic shelf units.