How to build a garden gate?
![Michael Morgan](https://cdn-fastly.hometalk.com/media/profile/2019/01/10/38488543_1.jpg?size=91x91)
6 foot by 4 foot roughly
Related Discussions
How can I build a garden enclosure to keep out pests?
![RuthieV](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-R-FF8282.png?size=50x50)
How can I build a garden enclosure with Belgium blocks &enclose it from deer & pests?
What to do with our livingroom ceiling?
![Kathy Wilson](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-K-69E0FF.png?size=50x50)
We took the old popcorn ceiling off in our livingroom and thought we could just paint it. We fixed some hairline cracks where the joint in the sheetrock are, primed a... See more
Cheapest way to make a large retaining wall
![Chantel Tupper](https://cdn-fastly.hometalk.com/media/profile/2017/07/09/100827_3.jpg?size=50x50)
I have almost 1/3 of an acre backyard that I will be re-establishing soon, and one of the projects will be a 2-3 ft tall retaining wall that will be approx. 25 feet ... See more
I am looking for someone to build me a pergola
![Arlette Twersky](https://cdn-fastly.hometalk.com/media/member_567360136202994_567360136_8078302_n_8c056a80fe8c66a13886871abf8152d4.jpg?size=50x50)
I have a cement patio and want to have someone with experience build a pergola with a deck over the patio. I have a picture of just the one I would like that I found ... See more
How can I repair a rip in my canvas gazebo?
![Elizabeth](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-E-50E3C2.png?size=50x50)
I have a 10x12 gazebo bolted to my deck. It is domed so it is very tall. I was trying to take the top down this Fall and accidentally ripped a hole in the canvas. Th... See more
Would it look right to put an outdoor kitchen under screened pool?
![Lacy Smith Hornberger](https://cdn-fastly.hometalk.com/media/profile/2014/09/06/899406.jpg?size=50x50)
I just moved into this house coming from a house in the country from lots of land; so this type of home is very new to me. It's a typical Florida home with a screened... See more
If you don't care about total privacy, cutting a design into the gate would be attractive.
Here is a link that May help.
https://www.google.com/url?sa=t&source=web&rct=j&url=https://m.youtube.com/watch%3Fv%3DtVgWUEDVai0&ved=2ahUKEwjB4IKZlPjfAhVWXSsKHfszDPoQFjABegQIEBAJ&usg=AOvVaw1XWGfNpxLRlhhAld43ZsQ2
Michael,
That is rather large for a gate. I have built several and one thing I learned is the larger it is, the more likely it will sag and warp over time. Does it need to be that large to allow entry of machinery or are you just filling the space? How big is the posts it is going to be attached to? Unless you have true 5x5 posts sunk 3 feet into the ground and securely tamped, the gate is going to loosen the post in the soil and pull it down towards the latch side. If you have a round post, or square 4x4 (only 3.5x3.5) it will not hold a heavy gate that wide. There are many ways of building a gate. Depending on the type of fence you have, you will want something complimentary, and, are you using it for privacy, which will also determine how you build it. If you go with that size, make it light as possible. I would use kiln dried cedar for the frame and square, tight lattice (real wood lattice) for the panel. You will need three heavy duty hinges as well. Remember that your cross brace or Z brace should go from the top of the latch side to the bottom of the hinge side. If you post a picture of the fence and opening, we could give better suggestions.