How do I make a wall shelf to display plates?
Related Discussions
How do can I best cut a hole to make a shelf in a Ikea Malm headboard?
Ikea Hack: I want to make cubbie holes with shelves behind the headboard for storage (cell phone, tissue, book, etc). Given that the headboard is hollow what tools do... See more
How do I make a rolling spice rack between the fridge and wall?
How do I make a storage unit with shelves between wall studs
Any ideas on how I could use leftover lattice? Inside decorating?
I have leftover lattice and would like to use it for some sort of indoor decorating project. Any ideas on a good use for it? It looks like this, just plain unfinished... See more
Planting under shady tree with roots
I have a jacaranda tree in my front yard with roots growing above ground. The tree has fern-like leaves that have prevented little growth of grass underneath. What ca... See more
These are picture ledges but would work great for plates.
https://www.hometalk.com/search/posts?filter=picture%20ledge
A 1x5 pine board cut to the length needed.
Measure in 3 inches and cut several grooves about 3/16 inch deep until your about 3/8 inch wide. Clean the groove with a good sharp chisel. Sand lightly and break the edges on all corners with sand paper. Tack rag n paint or stain. Use pre made shelf brackets or make your own. The groove gives the plates a place to sit so they don't slide off the front of the board. A bit of hot glue on the ends of the groove at each end helps from rolling off the ends, and is barely noticeable
I would get a 2 by 4 or by 3 put on the wall and make a notch in the back or nail a small piece of wood trim in the back to support the plates hang up with decorative brackets