I have 5 of these stools and can't get them apart to remove the seat back. The situpon cushion can be unscrewed - but not so the back part. I'm getting so frustrated ...
See more
We took the old popcorn ceiling off in our livingroom and thought we could just paint it. We fixed some hairline cracks where the joint in the sheetrock are, primed a...
See more
Does anyone know what type of hinges are attached to the top of this folding table? The legs fold in toward the back then the top folds down flat against the legs.
We have a head and foot board from a full size bed. We want to somehow put the two pieces together to make a King size headboard. We don't need a foot board any more....
See more
I am turning the sides of an old wooden crate into a coffee table top. The wood is similar to pallet wood: unfinished and prone to giving splinters. How might I go ab...
See more
I bought this lovely antique piece, but it's too short for an average adult. Can I safely add castors to the bottom of the feet or might they split? Any other ideas t...
See more
roof flashing..quick fix on the cheap...works for door kick plate too
I would say a door kick plate too, but it may be a little short, but worth a try.
Hi Cindy,
What comes to mind that looks good and is super durable is Diamond sheet metal, it can also be cut to size.
This is really only limited by your imagination. Flashing is great, or just wander through your local home improvement store, see what you find.
Hi ! Home depot has decorative metal plates , plain and ornate , that they sell in square sheets.