How do i attach washing machine motor clamps??
I am working with this model direct drive whirlpool washing machine: Lbr4132pq0
I replaced the parts and am attempting to reassemble it. The motor clamps ( L shaped brackets that twist at a 90 degree angle to hook/unhook to the base are giving me trouble. I can place one of the clamps at a time on, but the other one will not attach. I have tried it in both ways.
One video suggest i use a rubber mallet to help the direct drive coupling on the entire way. I tried this and even tried tapping on the end of the motor shaft while the rest of the parts are attached.
I have attached the video as a link. About 6:30 to 6:50 he shows the clamps going back on easily. In screenshot, yellow is the clamp and general outline drawn in green.
I however seem to have about half of an inch to an inch to adjust it. Tried pulling on it with screwdriver, using the mallet as a lever, and pushing with my knee.
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
How do i stop my big LG front load washing machine from walking ?
When in the spin cycle my washing machine starts "walking". I have made sure to level it. The legs are properly adjusted. It spins so hard that a large bolt in the b... See more
If it was me I would contact Whirlpool and ask them. I am sure they can give a much better and more detailed answer then I could.
Here is Whirlpool's contact info:
https://www.whirlpool.com/services/contact-us.html
I agree, contacting Whirlpool seems the best option.
Hi David, is it possible to attach both at the same time? Maybe Whirlpool can offer a suggestion for you. Or check this video out, hope it helps you out
https://www.youtube.com/watch?v=R5SS50zua4U
https://www.youtube.com/watch?v=MYn0_qCFdec
I would say that the coupling is not seated properly. Remove the motor and reseat the coupling. I would put the white plastic couplings on the rubber isolator, then put the coupling on the gear case. Then eyeball and adjust the coupling to the motor shaft and slip the motor on.
https://www.youtube.com/watch?v=9BZGOtb6e0o
https://www.youtube.com/watch?v=dOpjEs5MpKo
https://homeguides.sfgate.com/replace-drive-coupler-whirlpool-washer-69902.html
Here's a video that might help - https://www.youtube.com/watch?v=0ZIQapxxP-k
The top goes on first then snap the bottom on down
Check with manufacturer's website for DIY repairs.
Hi David. Since you know the make and model numbers, I recommend going to you tube for a step-by-step tutorial. That's what we use to solve these types of issues. in our home. Contacting the manufacturing company might help too. Good luck David.
Manufacter website for sure have that instructions
See if this helps https://www.google.com/search?q=how+to+attach+motor+clamps+to+washing+machine&client=firefox-b-1-d&sxsrf=ALeKk03D9o4mQdCGsKb0EmaeVE0F_R17DQ:1599500567209&tbm=isch&source=iu&ictx=1&fir=qynJfMKmf2DekM%252CgA_LI6TvIXnPuM%252C_&vet=1&usg=AI4_-kSWbO-CrwUiLudgQ0ux8lfJArXPMA&sa=X&ved=2ahUKEwi06oD5y9frAhWGzVkKHf1zCM8Q9QF6BAgJEAY#imgrc=qynJfMKmf2DekM