Help please--mini blinds replacement parts.
We have 17 sets of mini blinds, 1" aluminum. The blinds themselves are still in great shape, but after twenty years, the plastic end caps on the bottom rails are literally falling to pieces. We have found a source (after exhaustive search) for a replacement but at $1 each or more plus a minimum of $12 shipping (no kidding--for 34 little one inch pieces of plastic!). So the minimum cost to replace these caps would be $46. So I am wondering...have any of you any suggestions as to what we might do instead of purchasing more plastic that will inevitably fail? I glued a little piece of felt to one blind and it works ok--not pretty but at least it keeps the metal end from marking up the white window surround. Any one have other ideas? Would sure appreciate your ideas/experience with this issue. Thank you.
Related Discussions
Blackout curtains behind vertical blinds
I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba... See more
How to make a balloon garland?
Does anyone know how to make a balloon garland or a balloon arch?
Would you put curtains over french doors?
I have the french doors in my living room. The living room is separated by a large fireplace. It goes out into a sunroom.
How can I update this awful window?
We have this hideous window in our dining room (exterior anterior wall) and have been racking our brains with what to do with it. It's a double pain window and the gr... See more
How can I cover this very wide window?
I have a huge window in my living room. All three windows measure 112 inches across. The two on the ends are 25in. across. The one in the middle is 51.5in. I want to... See more
I need ideas for replacing shutter doors please
I need to replace two unsightly shutter doors in my kitchen and I have no idea what to use instead. They hide the washing machine and pantry so they do have to open c... See more
Garage door windows........
What is a tasteful and good looking way to cover up garage door windows? So if someone looks in there they can't see what's in there? Any help is appreciated! Thanks!
Here's a link where you order 34 mini blind ends (for quantities of more than 25 they are
$0.69 each. It is the S & H that is the deterrent. For about $38 you can have all new replacements, a bit cheaper than your $46.
https://blindparts.com/cart/
An idea that comes to mind is to put a thin strip of removable wallpaper or removable contact paper to the inside of the window where the blinds meet the frame.
I am really surprized that amazon didn't have those did you check there? Here is a link showing what they have just in case it helps:
https://www.amazon.com/mini-blind-end-caps/s?k=mini+blind+end+caps
I am dealing with same issues on my faux wood blinds that the plastic pieces are drying out and breaking off- the replacement pieces are not cheap- so we took down some of them and put up curtains instead - here is info to help you
the replacement parts are cheaper than replacing the blinds you could use felt (you may be able to find it in white) or a white fabric that would protect your windows
https://www.amazon.com/Mini-Blind-Parts/s?k=Mini+Blind+Parts
Hello. You might consider looking at thrift stores?
It may be time consuming, but you could widdle small pieces of wood to fit. perhaps fill the end with silicon and wipe off smooth.....
You could go to the dollar store and get white tape they have it on the roll it sticks great cut it to fit on the end it will pad it add cover the end you don’t need the plastic piece the tape is pretty strong it’s like 3 inches wide so you could cut it wrap a little over the edge to cover the sharp part and that will work