I am planning on mounting some small lights under the cabinets of my Crafting work area.
-
KMS Woodworks on Jul 27, 2011The best for low heat would be LED's...to keep these in a more "color neutral" go for the Warm White variety...cool white will cast a blueish tint. In our "craft" area we also have a boom light that can be used for more intense detail work. Ours is halogen which can run hot but next time I need to get a bulb I'm going to switch to a "cree" LED that will fit the 2 prong halogen set up.Helpful Reply
-
-
WallsTreat Studio/ Kass Wilson on Jul 27, 2011There are special lights that are available at the craft stores that will give you true light. The surfaces that I work on are very large so I had to go with a halogen shop light. Avoid that if possible, they are hot and energy guzzlers.Helpful Reply
-
-
Paul R on Jul 28, 2011I agree, I have halogen lights under my cabinets and they get way too hot for my comfort. I only use them when I need them and I turn them off after. Partially for safety reasons.Helpful Reply
-
-
Strock Enterprises, Inc. on Jul 29, 2011I agree that LED lights are the way to go. One thing you'll want to look for is their "color range." A color range of 5000k will be a crisp white light while a 2700k will be more of a warm yellowish light. So, pick your color according to your task or use. I would probably recommend you purchase the 5000k to meet your needs of "true color." Now, as far as price, you will spend more for a 12" LED strip (probably about $75 - $100.) However, they're supposed to last essentially forever and use very little electricity and don't put off any heat. So, spend a couple dollars more and get what you want. Good luck and let us know how it works out for you. Sincerely, Trey StrockHelpful Reply
-
-
Barbara N on Jul 29, 2011You need a FULL SPECTRUM bulb... They are available at lighting stores and large home improvement stores...Helpful Reply
-
-
Pamala S on Jul 29, 2011Thanks for the pointers!!!!Helpful Reply
-
-
Pamala S on Aug 24, 2011Going shopping for the lights today. Very thankful to all of you for helping to make me feel more secure in what I will be looking for.Helpful Reply
-
-
KMS Woodworks on Aug 24, 2011Let us know what you findHelpful Reply
-
-
Pamala S on Aug 24, 2011http://www.arcadianlighting.com/mx-53704al.html this is one like i ended up with. OMGosh I wasn't expecting such a hefty price tag!!!Helpful Reply
-
Related Discussions
What is your favorite season: spring, summer, winter, or fall?
Let's chat about our favorite seasons!Whether you're a summer lover, a fall enthusiast, a winter aficionado, or a spring admirer, we want to know: What's your favorit... See more
How do I cover the edges of a cracked mirror?
I have a mirror tall and slender that has beveled edges and one side has chips out around the edging and I don’t know how or what to make a frame with to cover it. ... See more
How can I repair a cracked mirror on a mirrored closet door?
What are your thoughts on painted brick: yay or nay?
Painting bricks can completely transform the appearance of a home, giving it a fresh, modern look or adding a pop of color to an otherwise plain facade.On the other h... See more
How can I get evergreen climbing vines that don't attract bees?
Need privacy screen I can train on trellises for my patio. There's lattice there, but not enough to block out neighboring home. This is a mobile home. Would love flow... See more
Patio umbrella keeps blowing over
Does anyone have a easy solution to keep opened patio umbrella from flying up and falling over even on a semi windy day? I have the heavy base, it's in a hole in a pa... See more