How can I remove old bathtub stickers?
Related Discussions
How to clean a mirror without streaks?
Every time I clean my mirrors, they end up having tons of streaks and almost look worse than before I started. What could I use to clean them that won't leave streaks... See more
How to clean burns on stainless steel pans?
Help! I burned my pan. How do I clean stainless steel cookware that's been burned?
How to clean shower doors
How to clean glass shower doors
How to clean my kitchen cabinets from grease?
My kitchen cabinets are embarrassingly greasy. Please share your degreasing tips with me so I don't have to cringe every time I glance at my cabinets.
How to clean hardwood floors in the kitchen?
What is the best way to clean hardwood floors in the kitchen?
Why do I have sand in my bathtub?
I’m wondering if it’s just a clog of beach sand that keeps coming up or a bigger plumbing issue. I don’t want this to reoccur, so any information on why this ha... See more
How can I remove spray paint from a fiberglass bathtub?
Any idea how to "Remove Spray Paint" (white) from my "Bath"?It's just a little bit, I was Spraying the Board at Side of the Bath and...... Oh, the Bath is "Fibre Glas... See more
It may take a combination of all of the suggestions to remove those pesky stickers. Hope you are/were successful.
This video might have some decent tips: https://www.youtube.com/watch?v=Z3yVHWlnEms
WD40 or Goof Off will remove stickers
Try WD-40. Put on the Decals allowing it to work long enough to remove the adhesive. It will leave a residue that might take some time to get rid of.Use a non-toxic bathroom cleaner that would work on soap scum and see if that works of the residue or fill the tub with hot water and white vinegar.
I would give WD 40 a shot but remember it does have a smell.
Hey Becki: WD40 removes a lot of adhesives. Spray it on, let it sit for a bit, maybe 40 or 50 seconds, and then try to scrape it off with a plastic putty knife. You may have to do it a couple of times, but this should work. It works for me :)
WD 40, give it time to work, meaning let them soak for at least an hour. Then try to looses around the edges with a plastic scraper.