I get this all the time. I remove the bulk of the polyurethane with a butter knife to prevent scratching. Then using 0000 steelwool to remove the rest. Leaves no residue or scratches.
You can buy urethane remover from a diy store. Or go there and read the ingredients of the remover and see if you have them at home and save some money.
Baking soda mixed with liquid dish soap can make a good paste to gently rub on the stain. Be sure to rinse the stainless steel surface thoroughly, and towel dry. If the stain still remains you can try vinegar. Remember to thoroughly rinse and towel dry.
Every time I clean my mirrors, they end up having tons of streaks and almost look worse than before I started. What could I use to clean them that won't leave streaks...
See more
How do I remove this discoloration from the stainless steel sink? I previously asked this question, I tried everything that was suggested baking soda, vinegar, Mr. cl...
See more
Here is some advice on how to get rid of the stain: https://www.justanswer.com/appliance/07u12-remove-polyurethane-stainless-steel-appliance.html
I get this all the time. I remove the bulk of the polyurethane with a butter knife to prevent scratching. Then using 0000 steelwool to remove the rest. Leaves no residue or scratches.
Hi Laurie, put on some rubber gloves
How to Remove Polyurethane From a Sink
You can buy urethane remover from a diy store. Or go there and read the ingredients of the remover and see if you have them at home and save some money.
Soapy Boiling water in contact with polyurethane until it softens. Lift with blunt knife or spatular.
Baking soda mixed with liquid dish soap can make a good paste to gently rub on the stain. Be sure to rinse the stainless steel surface thoroughly, and towel dry. If the stain still remains you can try vinegar. Remember to thoroughly rinse and towel dry.