How do I remove transmission fluid of my driveway pavers
Related Discussions
How to clean a mirror without streaks?
Every time I clean my mirrors, they end up having tons of streaks and almost look worse than before I started. What could I use to clean them that won't leave streaks... See more
How to clean burns on stainless steel pans?
Help! I burned my pan. How do I clean stainless steel cookware that's been burned?
How to clean my kitchen cabinets from grease?
My kitchen cabinets are embarrassingly greasy. Please share your degreasing tips with me so I don't have to cringe every time I glance at my cabinets.
How to clean hardwood floors in the kitchen?
What is the best way to clean hardwood floors in the kitchen?
How do I get the black marks off my composite deck?
As we all know New England is getting hammered with snow this year! And I had so much snow on the deck that I had to use the snowblower to get it off. I'm anticipatin... See more
WD-40. Did a leaky oil pan leave a big ugly spot in the middle of your concrete driveway? To get rid of an unsightly oil spot, just spray it with a generous amount of WD-40 and then hose it down with water.
Soda (Coca Cola). Here’s how to remove oil stains from concrete drive-ways and garage floors: Gather up a small bag of cat litter, a few cans of cola, a stiff bristle broom, bucket, laundry detergent, bleach, eye protection, and rubber gloves. Cover the stain with a thin layer of cat litter and brush it in. Sweep up the litter and pour cola to cover the area. Work the cola in with a bristle broom, and leave the cola for about twenty minutes. Mix 1/4 cup laundry detergent with 1/4 cup bleach in 1 gallon (3.7 liters) warm water and use it to mop up the mess.
Oven Cleaner. Get those unsightly grease, oil, and transmission fluid stains off your concrete driveway or garage floor. Spray them with Easy Off No Fume Oven Cleaner in the BLUE can. Let it settle for 5-10 minutes, then scrub with a stiff brush and rinse it off with your garden hose at its highest pressure. Severe stains may require a second application.
Kool-Aid. Nasty rust stains on your concrete? Mix unsweetened lemonade Kool-Aid with hot water. Scrub and the rust stain should come right out.
Baking Soda. Salt and commercial ice-melt formulations can stain — or actually eat away — the concrete around your house. For an effective, but completely innocuous, way to melt the ice on your steps and walkways during those cold winter months, try sprinkling them with generous amounts of baking soda. Add some sand for improved traction.
Ammonia. Tired of those annoying discolorations on your concrete work? To get rid of them, scrub with 1 cup ammonia diluted in 1 gallon (3.7 liters) water. Hose it down well when you’re done.