DIY Ribbon Wreath / How to Make a Ribbon Wreath Tutorial
This video below shows how to make a very cute and easy ribbon wreath!
Supplies used for this wreath:
1 Dollar Tree 14 inch wire wreath frame
Zip Ties or Pipecleaners
Scissors
Wired ribbon of your choice - I used 8 yards each of 5 different ribbons. Two ribbons are 2 1/2 inches, and 3 are 1 1/2 inches. I recommend using enough ribbon to equal between 9 1/2 and 10 1/2 inches across so there's enough coverage of the wreath frame.
This will be a very compact wreath, and will measure 18 inches in diameter and about 3 inches deep.
Bow supplies used (optional):
1 pipecleaner
2 pieces of 1 1/2 inch ribbon cut 27 inches each for the streamers
2 pieces of 1 1/2 inch ribbon cut 30 inches each for the bow loops
I use a Bowdabra bow maker, but you can use your preferred bow maker or free hand.
Resources for this project:
Comments
Join the conversation
-
Thank you so much for sharing, I can't wait to make my own! I may have to watch again the zip tie has me a bit confused.
-
I couldn't find the Video
Frequently asked questions
Have a question about this project?