What's the best way to cut terra cotta pots?

+3
Answered
Thanks!
  6 answers
  • Janet Pizaro Janet Pizaro on Feb 23, 2017
    www.ehow.com/how_7713466_cut-terracotta-pots.html

  • Hillela G. Hillela G. on Feb 23, 2017
    You can use a dremmel!

  • John John on May 12, 2017
    dremel tool with diamond coated saw disks.....under trickling water or diamond drill bits for holes---again under trickling water

  • Susan Axsom Curtis Susan Axsom Curtis on May 18, 2017
    Place masking tape where you want to cut the put. draw a line where you want to cut using a dremel tool with diamond cutting disk. if the pot is very small you might not need to cut it under a trickle of water. If it is a larger pot the you will need to cut it under a trickle of water to keep the cutting disk and pot cool. if the pot over heats it might crack where you don't want it to.

  • Harry Harry on May 25, 2017
    Similar idea to the Dremel tool, but if the pot is large and thicker walled, I would use an Angle grinder fitted with a CUTTUNG DISC> Do not use water - it is not good near electricity!!