Method 3. Installing Masonry Anchors. Choose masonry anchors to hang objects over 25 pounds (11 kg). Use a hammer drill for the best results. Drill a hole to accommodate the anchor. Tap the anchor in the hole until it's flush with the wall. Place the screw into the anchor. How to hang things on concrete walls — Freckle & Fair | Recipes, DIY ...
Mar 7, 2017 - YOU'LL NEED: screw. anchor. drill (hammer drill works best) masonry drill bits. screwdriver or screwdriver bit for drill. optional: wall spackle/putty & spackling knife, plus pliers if you mess up for the anchors.
I'd go to the Hardware store and talk to them. I know they make screws just for masonry. It's not as hard as it sounds. My husband hung a wreath for me on our outside brick in just a few minutes. Good Luck!
my basement walls are solid poured concrete. I want to hang a peg board above my workspace to hold tools and things. How can I affix the wood to the poured concrete?
Not sure what is under the stucco, but it's as hard as rock. Id'd like to put up shutters or something to break up a big blank wall. Also, I'd like to put up a handma...
See more
I put a wall of drapes behind my bed as a sound barrier and it has made a lovely backdrop in lieu of a headboard. My challenge is how to hang two pictures that used t...
See more
I bought a place near the ocean that has concrete block walls. They put a rough stucco finish on it and painted it. I would prefer a smoother look. How do I do tha...
See more
Here, you have options!
https://diy.stackexchange.com/questions/76883/hanging-picture-on-a-very-hard-concrete-wall
https://m.wikihow.com/Hang-Things-on-a-Cement-Wall
https://www.popularmechanics.com/home/tools/reviews/g1314/how-to-fasten-anything-to-concrete/
Get some molly bolts recommended for the weight of your object, Then screw in and hang.
- https://www.wikihow.com/Hang-Things-on-a-Cement-Wall https://www.wikihow.com/Hang-Things-on-a-Cement-Wall+&cd=23&hl=en&ct=clnk&gl=us" rel="nofollow noopener" target="_blank">Cached
Method 3. Installing Masonry Anchors. Choose masonry anchors to hang objects over 25 pounds (11 kg). Use a hammer drill for the best results. Drill a hole to accommodate the anchor. Tap the anchor in the hole until it's flush with the wall. Place the screw into the anchor. How to hang things on concrete walls — Freckle & Fair | Recipes, DIY ...- www.freckleandfair.com/blog-posts/2017/2/.../how-to-hang-things-on-concrete-wallsCached
Mar 7, 2017 - YOU'LL NEED: screw. anchor. drill (hammer drill works best) masonry drill bits. screwdriver or screwdriver bit for drill. optional: wall spackle/putty & spackling knife, plus pliers if you mess up for the anchors.I'd go to the Hardware store and talk to them. I know they make screws just for masonry. It's not as hard as it sounds. My husband hung a wreath for me on our outside brick in just a few minutes. Good Luck!