How to hang a backless cabinet on the wall.

Ok here goes. U screw a wooden strip one inch less than the widt of the canpbinet to the wall. The top edge of the strip is beveled at 30 degrees. Then yo screew a similar striip t o top of the frame, this one with the bevel on the bottom.

It would be much easier to cut a piece of plywood and attach to the back of the cabinet.

You could get 4 brackets, 2 for top and 2 for bottom of your shelf. You probably would need another person to help you with this. Decide where you want the brackets on the wall for the bottom, then attach them to the wall, then attach the top brackets evenly to the top of the shelf. it would be like you’re putting a shelf up, except you would flip the brackets reverse at the top. So fancy brackets at the top and fancy brackets at the bottom. Here are some pretty ones. I hope this isn’t too confusing. Sometimes I wish I could draw a picture of what I’m trying to explain.

https://www.google.com/search?q=decorative+brackets+lowes&client=safari&sa=X&hl=en-us&biw=1024&bih=666&tbs=vw:l,ss:44&tbm=shop&prmd=sinv&srpd=2461283580843397305&prds=num:1,of:1,epd:1907675888173547059,paur:ClkAsKraX8uJHgobmD9blr-ZtfVBVYgKlyElwH7LkQh_nt8TCmyARxud1EOHRKXKcsOU0f3KMwXYpio9Pp4nUWsa6ZN_HwavV7cRDHCVDXitKXdrGxylosW-qhIZAFPVH72zGcsi5RosJq9t1AE9vUKjXqmJRQ,cid:2122139277853648868&ved=0ahUKEwi2v4zTr5jbAhXjwVkKHZVHBrIQgjYI3QQ