I like aileens quick grab glue. It drys clear and i like the quick grab part u have enough time to adjust but it will also hold ur material up while u work
Hands DOWN, spray Adhesive. I buy a huge can at harbor frieght for a lot cheaper than at least or hardware stores (even wal-mart)!!! It lasts me forever! I always use it outside though, actually in the yard if possible because it can leave a sticky mess on your floor or your work surface with the overspray. I mean you can cover stuff with newspaper or plastic, just be careful!
Elmer's white school glue. Just thin it a bit with some water, and paint it on evenly with a wide paint brush. Immediately adhere the fabric. Let it dry overnight. You can use wooden clothespins to hold any spots together.
Did you try using spray adhesive? Spray adhesive is good because it will not soak through the fabric. If you need something to hold down the corners you can use double sided tape.
I made little sea glass angels and I am searching for a good glue to secure the wings and halos on as they are metal.
I would appreciate any suggestions - thank you!
What is the best adhesive for gluing porcelain to porcelain? I used E6000 in an attempt to glue a porcelain cup to a porcelain saucer with zero success.
i am trying to make table top water fountain with some terracotta clay pots. But the design I made need my pots to be glued to each other. What type of glue will work...
See more
It's only for show though then I need to take it off
Did you try using spray adhesive? Spray adhesive is good because it will not soak through the fabric. If you need something to hold down the corners you can use double sided tape.
I would use Mod Podge!