How do I attach a flagpole to a brick house?
by Jean Day
+1
What kind of drill bits and screws do I need to purchase?
4 answers
-
![Sunny C]()
Sunny C
on Jul 21, 2017
Hello jean; I have seen these kits at Ace Hardware and at Home Depot. Everything is included in the kit.I hope that this helps you!! Take Care!
-
![Dianacirce70]()
Dianacirce70
on Jul 21, 2017
Use a bit for cement/brick and drill pilot holes, then cement screws to hold it in place. -
![Karen Krysowaty]()
Karen Krysowaty
on Jul 21, 2017
Our house is brick but we put ours on the wood trim coming from the roof and we got our kit from Lowes -
![William]()
William
on Jul 22, 2017
This how I attached my flag bracket. Use a 1/4" masonry drill bit. Line up the bracket so the holes hit the mortar joint (can't drill into brick). Mark the holes. Drill into the mortar joint at the marks. Attach the bracket using Tapcon screws made for masonry. I tried to use anchors in the holes but they eventually loosened up from the flag waving.
Sunny C
on Jul 21, 2017
Sign Up to Answer
Suggested Project Book
